Safety Instructions; Technical Data - DURAVIT B 1 Series Instructions For Mounting And Use

These instructions are part of the Duravit
product and must be read carefully and kept
available at all times.
Target readership and qualifications
The product may only be installed by a qualified
plumber.
Explanation of the key words
Indicates a hazardous
CAUTION
situation which, if not
avoided, could result in minor
or moderate injury.
Addresses practices not
NOTICE
related to physical injury.

Technical data

Operating pressure
Recommended
Test pressure
1 MPa = 10 bar = 145 PSI
Hot water temperature
This unit meets or exceeds
the following:
• ASME A112.18.1
• CSA B125.1
• ADA Compliant
Certified by
CSA Group
4
MAL_57158/18.09.2
max. 72.5 PSI
43.5 PSI
72.5 PSI
max. 140 °F

Safety instructions

Cut and crush injuries
> Wear gloves when installing the product.
Product and/or property damage
> Observe the local installation regulations and
any country-specific standards at all times.
> Equalise pressure differences between cold
and hot water connections.
> Observe the manufacturer's instructions for
installation with continuous flow heaters.