Sharp KS-M102 Service Manual page 13

3. With the lid held with a handle, first release the latch button and open it to a normal degree, at which
the lid first stops.(Fig. 4.)
4. Press the both sides of the lid assembly outward at the claws
5. Unlock the lid from claw
6. Now the lid ass'y is free.
B
A
1. Remove lid in accordance with "REMOVE OF LID ASS'Y".
2. Close the lid cover. Push on the hinge pin, and using the pilers or similar to pull out from lid cover.
3. Pull out further the lead wire PCB and lead wire earth.
4. Remove 6 screws and remove the inner lid from lid cover.
5. Now the lid ass'y is free.
Pliers
by pull the lid up.
C
Claw A
REMOVE OF LID COVER
Hinge pin
Push
Fig. 5.
and
A
Claw
B
Fig. 4.
Inner lid fixing screws
Lid cover
13
to release.
B
Lid
Claw C