Wireles Modes; Monitor - JETI model JETIBOX profi Manual

7. Wireles Modes

The JETIBOX profi contains a built-in wireless data transfer system Duplex 2.4GHz. The JETIBOX
profi can be operated in two wireless communication modes – "Monitor" or "Tx module".
Mode switching sequence:
1.
Switch-On the JETIBOX profi
2.
Push ESC: Main menu, select item SET-UP,
confirm by ENTER
3.
Select item DUPLEX, confirm by ENTER
4.
Select item „ JETIbox mode" and carry
out changes by arrows left or right
5.
Prompt confirmation of mode change.
Select YES, confirm by ENTER
At present you have carried out a mode change. Description of particular modes see below.

7.1 Monitor

When using this mode the JETIBOX profi can only receive data via the existing connection
between the transmitter and receiver (listen). The JETIBOX profi cannot communicate with the
receiver without a switched on transmitter. If you want to operate the JETIBOX profi in this
mode it is therefore mandatory to carry out the binding procedure between the JETIBOX profi
and the transmitter as shown below.
JETI
6
BOX PROFI
EN