Introduction
The JETIBOX PROFI is designed to be an easy to use mobile wireless device for
viewing, processing and storing your telemetry data. The JETIBOX PROFI also is
designed to work in two different wireless modes with the JETI DUPLEX 2.4GHz
systems.
1. JETIBOX PROFI Features
1. Navigation buttons
2. Enter button
3. On/Off and Esc (exit) button
4. LCD Desktop Display
5. 3.5mm headphone jack
6. Three pin connector (Ji) for legacy JETIBOX compatible equipment
7. USB connector for JETIBOX PROFI to PC
8. Battery switch
9. Connector (Ti) for Duplex 2.4GHz transmitter or module
10. Speaker
11. Integrated antenna*
*When handling the JETIBOX PROFI avoid covering the antenna as this
can affect range and sensitivity.
2. Charging the Battery
The JETIBOX PROFI contains an internal LiPo type battery and charging circuitry. The
JETIBOX PROFI can be charged using three different inputs:
USB
Three pin (Ji) connector, 5.7V-20VDC (5W max) input
Transmitter (Ti) connector, 5V-20VDC (5W max) input
Battery charge progress is indicated by the battery symbol in the lower right corner of the
display. Battery is completely charged when the battery symbol is full. When the battery
indicator is full the charge input source will be displayed. (USB, Ji -three pin connector
or Ti -transmitter connector)
3. Before Switching ON for the First Time.
Y
our JETIBOX PROFI is shipped with the battery switch in the OFF position. Before
you switch your JETIBOX PROFI ON for the first time, slide the battery switch toward
the Ti connector to the ON position.