Table of Contents
Advertisement
Adjusting the audio
Muting the sound
Press MUTE to reduce the sound (1/2 MUTE) or turn off the
sound (MUTE). Each time you press MUTE, the mute mode
will change in the following order.
→ Normal → 1/2 MUTE → MUTE →
If the closed caption mode is set to OFF when you press
MUTE, the closed caption feature is automatically activated.
To mute the audio without automatically activating the closed
caption feature, use the VOL z button to set the volume to 0.
See "Using the closed caption mode" on page 78 for more
information on closed caption modes.
+10
–
ACTION
100
MENU
ENTER
Digital audio selector
You can use the Digital CC/Audio selector to conveniently
switch between audio tracks on a digital channel (for those
channels that have multiple audio tracks). This temporarily
overrides the audio track chosen by the language option under
Audio Setup.
1. Press MENU and open the APPLICATIONS menu.
2. Highlight DIGITAL CC/AUDIO SELECTOR and press
ENTER.
3. Press • or x to highlight the desired service, and then press
ENTER.
HMX94(E)076-81(8b-UseTV)
79
Chapter 8: Using the TV's features
VOL z
RECALL
MUTE
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound from your TV's speakers.
MTS also can transmit a second audio program (SAP)
containing a second language, music, or other audio
information (when provided by individual stations).
The MTS feature is not available when the TV is in VIDEO
mode.
When the TV receives a stereo or SAP broadcast, the word
"STEREO" or "SAP" appears on-screen when RECALL is
pressed.
To listen to stereo sound:
1. Press MENU and open the AUDIO menu.
2. Highlight AUDIO SETUP and press ENTER.
3. Press z to highlight the MTS field, and then press • to
select STEREO.
Audio
Audio
Audio Settings
Advanced Audio Settings
Audio Settings
Audio Setup
Advanced Audio Settings
Audio Setup
DVD RTN
Navigate
Select
Back
Exit
EXIT
CH RTN
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
Note:
• You can leave the TV in STEREO mode because it automatically
outputs the type of sound being broadcast (stereo or monaural).
• If the stereo sound is noisy, select MONO to reduce the noise.
To listen to an alternate language on an ATSC digital station
(if available):
Highlight the LANGUAGE field in step 3 above, and then
press • to select the language you prefer.
To listen to a second audio program on an analog station
(if available):
Select SAP in step 3 above.
Note:
• A second audio program (SAP) can be heard only on those TV
stations that offer it. For example, a station might broadcast another
language as a second audio program. If you have SAP on, you will
see the current program on the screen but hear the other language
instead of the program's normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station's normal audio
will be output. However, occasionally there is no sound at all in SAP
mode. If this happens, set the MTS feature to STEREO mode.
9/28/04, 11:05 AM
79
Advertisement
Table of Contents
