Connecting Your Tv; Note Regarding Picture Quality; Connecting A Vcr - Toshiba 53AX62 Owner's Manual

Toshiba corporation projection television owner's manual 53ax62
Hide thumbs Also See for 53AX62:
Table of Contents

Advertisement

Connecting your TV

Note: Cables are not supplied with your TV.
Coaxial cable is the cable that comes in from your antenna, cable TV service,
or cable converter box. Coaxial cable uses "F" connectors.
Standard stereo A/V cables usually come in sets of three, and are typically
color-coded according to use: yellow for video, red for stereo right audio, and
white for stereo left (or mono) audio. Your TV's standard A/V inputs are
color-coded in the same manner as the cables.
S-Video cable is for use with video equipment that has S-Video connectors.
Component video cables come in sets of three (typically color-coded red,
green, and blue), and are for use with video equipment that has component video
connectors. Your TV's ColorStream
®
the same manner as the cables.

NOTE REGARDING PICTURE QUALITY

When connecting video equipment to your Toshiba TV:
For GOOD picture quality: Use a standard yellow video cable.
For BETTER picture quality: If your equipment has S-video connectors, use
an S-video cable instead of a standard yellow video cable. (You still must
connect the standard red and white audio cables for full system connection,
but do not connect a standard yellow video cable at the same time or the
picture performance will be unacceptable.)
For BEST picture quality: If your equipment has component video
connectors, use component video cables instead of a standard yellow video
cable or S-video cable. (You still must connect the standard red and white
audio cables for full system connection.)

Connecting a VCR

This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
Cable lead-in from
cable box or antenna
Stereo VCR
VIDEO
AUDIO
L
R
TV
S-VIDEO
VIDEO
L/ MONO
AUDIO
R
VIDEO 1 VIDEO 2
IN
(component video) inputs are color-coded in
IN
OUT to TV
IN from ANT
CH 3
OUT
CH 4
)
AUDIO CENTER
ANT( 75
CHANNEL IN
ANT-1
ON
OFF
OUT
OUT
VAR
R
L
AUDIO
ANT-2
Y
VIDEO
L/
L
P
MONO
B
AUDIO
AUDIO
P
R
R
R
COLOR
STREAM
INPUT
DVD IN
OUT
Coaxial (antenna) cable
Standard stereo A/V cables
(typically color-coded yellow for video,
red and white for audio)
S-video cable
Component video cables
(typically color-coded red, green, blue)
CAUTION: Do not plug in any power cords
until you have finished connecting all equipment.
Caution:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use the S-video
cable, instead of a standard video cable.
Do not connect a standard video cable and
an S-video cable to Video-1 (or Video-2) at
the same time, or the picture performance
will be unacceptable.
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
7

Advertisement

Table of Contents
loading

Table of Contents