Turning Off The Built-In Speakers; Selecting The Audio Out Sound - Toshiba 52HMX84 Owner's Manual

Turning off the built-in speakers

Use this feature to turn off the TV speakers when you connect an
audio system (see "Connecting an audio system" on page 16).
To turn off the built-in speakers:
1. Press MENU, then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight SPEAKERS, and then press ENTER.
3. Press y or z to select OFF, and then press ENTER.
A U D I O
STABLE SOUND
SPEAKERS
AUD I O OUT
: SELECT ENTER : SET
To turn on the built-in speakers:
Select ON in step 3 above.

Selecting the AUDIO OUT sound

This feature allows you to select the sound source (MAIN or POP)
that is output from the AUDIO OUT terminals (for example, see
"Connecting two VCRs" on page 14).
This is useful when amplifying or recording the POP sound with
external equipment while listening to the sound of the main picture
through the TV's speakers.
To select the AUDIO OUT sound:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight AUDIO OUT, and then press
ENTER.
3. Press y or z to select MAIN or POP, and then press ENTER.
A U D I O
STABLE SOUND
SPEAKERS
AUD I O OUT
: SELECT ENTER : SET
• MAIN: Outputs the sound of the main (left window) program
through the AUDIO OUT terminals.
• POP: Outputs the sound of the POP (right window) program
through the AUDIO OUT terminals.
58
ON
O F F
MA I N
P O P
Note:
Make sure the volume control of your audio
amplifier is set to a moderate listening level.
POWER
TV
LIGHT SLEEP
CABLE/SAT
VCR
1 2 3
DVD
AUDIO1
AUDIO2 4 5 6
MODE
7 8 9
PIC SIZE
+10
0
100/
ENT
ACTION
MENU
MENU
FAV ENTER
ENTER
yzx •
FAV
VOL
CH
EXIT
DVD CLEAR
DVD RTN
CH RTN INPUT RECALL MUTE
SLOW/DIR SKIP/SEARCH
Note:
When the POP window is closed, the sound of
the main program is output through the
AUDIO OUT terminals, even if POP is
selected in the AUDIO OUT menu.