MARKING PANEL SP-114
A marking panel SP-114 can be installed on the
luminaire in 3 different locations. This marking
panel is installed perpendicular to the diffusor of
the luminaire, as shown in the pictures below.
The panel is pre-printed and has a plastic
accessory on each side that is used to fasten the
panel to the luminaires.
There are 2 arrow stickers that can be placed in
each side of the marking panel to point to the
desired direction.
Wall or ceiling installation
Recess mounting in a wall
SP-114 marking panel
Suspended ceiling installation
with Α-3018 mounting springs
and SP-114 marking panel
Page 2 from 4
Installation methods
Recess mounting
base Α-3016
A-3018
Placing the SP-114 marking panel
Place the plastic mounting accessories of the
marking panel as shown in pictures.
ΝΟΤΕ!! This marking panel (SP type) can not
be installed on CRV luminaires.
Mounting springs Α-3018
Special mounting
springs for
suspended ceiling
installation
Suspended ceiling installation
Ceiling installation
with SP-114 marking panel
Wall installation with SP-114
marking panel
A-3018
923312017_09_003