Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Logic Controls LC8100
Summary of Contents for Logic Controls LC8100
- Page 2 LC8100 User Manual V1.1 NOTICE The manufacturer of the Industrial Computer makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or consequential damages.
-
Page 3: Table Of Contents
LC8100 User Manual V1.1 TABLE OF CONTENTS TABLE OF CONTENTS ........................3 OVERVIEW ............................ 1 CARE AND HANDLING ........................2 PRODUCT FEATURES ........................3 INSTALLATION INSTRUCTIONS ....................... 4 SAFETY TIPS ..................................4 COMPONENT PLACEMENT ............................... 6 MOUNTING INSTRUCTIONS ............................6 TOOLS/MATERIALS REQUIRED ............................ -
Page 4: Overview
The LC8100 uses dual-core Intel Baytrail processors, so it can run Windows and Linux-based applications. This enables the unit to be used in a wide variety of applications. The LC8100 also provides a very impressive compliment of up-to-date I/O ports – VGA, Ethernet, PS/2, USB, and RS232 are all included. -
Page 5: Care And Handling
Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air. To clean the LC8100 unit cabinet, use a cloth lightly dampened with a mild detergent. Do not immerse unit in water. ... -
Page 6: Table Of Contents
LC8100 User Manual V1.1 PRODUCT FEATURES Fanless and ventless operation Intel Baytrail-I E3825 1.33GHz dual core processor, 1MB L2 Cache Mass storage: SATA/mSATA SSD (no moving parts) or/and SATA hard disk drive Enclosed in rugged die cast case up to 4GB DDR3L SODIMM RAM mSATA SSD drives are used;... -
Page 7: Installation Instructions
LC8100 User Manual V1.1 INSTALLATION INSTRUCTIONS SAFETY TIPS Read these instructions carefully. Save these instructions for future reference. Install this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer Installation measures must be taken to prevent physical damage to the power supply cord, including proper routing of the power supply cord and provision of a receptacle (socket outlet) near the fixed ITE, or positioning the fixed ITE near a receptacle (socket outlet). - Page 8 LC8100 User Manual V1.1 This product should be operated from the type of power indicated on the power adaptor. If you are not sure of the type of power available, consult your dealer or local power company. The feeding line should be exclusive for the equipment, unless it is used for other compatible equipment and it should not overpass the maximum consumption of the line.
-
Page 9: Component Placement
2. The beeps from the speakers can be heard. 3. The LED indicator on the front panel can be seen. Place the LC8100 above grill/counter level, out of the way of possible spills. Leave enough spaces around the unit for ventilation. -
Page 10: Device Location
Electrical network power supply: 100–240 VAC~1.5A, 50/60 Hz Before mounting the device, please make sure that: Mounting brackets are provided to facilitate mounting the LC8100 to a wall. Vertical mounting stand is used for mounting the LC8100 vertically on the counter top. -
Page 11: Mounting The Device
5.5 kg (12 lb.). This weight is determined by adding a safety margin weight to the weight of the unit. Wall anchors with specified weight capacity are available commercially. The power outlet socket is located near to the desired mounting location for the LC8100. 5. MOUNTING THE DEVICE... - Page 12 LC8100 User Manual V1.1 2. mount the LC8100 on the counter top with screws Mounting the LC8100 to the wall with the mounting brackets Allow at least 3 inches of space from the top of the unit and 6 inches from the sides to allow...
- Page 13 Use concrete wall anchors (2 pieces - 1/16" x 3/8") if it is a concrete wall. The LC8100 is a fanless and ventless unit. Heat is dissipated through the metal case. So, allow at least 6 inches of space from the top of the unit and 3 inches from the sides for proper ventilation.
-
Page 14: Connections And Turning On Power
Connect power cord to the power adapter and plug the power cord into AC power outlet. (The power adapter must be connected to the LC8100 f i r s t before it is connected to AC power outlet. -
Page 15: Bios Setting
LC8100 User Manual V1.1 BIOS SETTING Each time the LC8100 is powered on, it will run a self diagnostic and continue booting from storage media. BIOS settings are stored in a CMOS memory. To enter BIOS setup, as soon as you hear the system beep, just before LCI logo splash screen appears, quickly press the [Delete] key on the keyboard. - Page 16 LC8100 User Manual V1.1 Boot Device Priority Sequence To specify the boot sequence from available devices, enter the [Boot] menu. Then setup [Boot Option Priorities] to choose the priority desired for the booting process from the list of available boot devices.
-
Page 17: Troubleshooting
AC outlet. 5. If the LC8100 is connected to a power supply but the power LED is off, press the power button to turn on the unit. If it does not turn on, try replacing the power supply. - Page 18 If the test passes, replace the serial device. If the test fails, go to step 5. 5. Attach a wrap plug to the RS232 port of the LC8100 and rerun the RS232 loop test. If the test passes, replace the RS232 cable. If the test fails, replace the LC8100.
-
Page 19: Specifications
LC8100 User Manual V1.1 SPECIFICATIONS I/O PORTS SYSTEM Video VGA 1920x1080 pixels max Intel Baytrail-I E3825 1.33GHz Dual Core processor with 1MB Network Interface 10/100/1000 Mbits Ethernet, L2 Cache Network boot capable System Memory Up to 4GB, DDR3L SODIMM x1...