Related Manuals for Seada SDCP9 Series
Summary of Contents for Seada SDCP9 Series
- Page 1 SDCP9 Wallplate Control Panel-9 buttons 8 programmable buttons plus 1 audio mute button, 3 built-in programmable RS232, 2 RS485 and 2 IR connectors. S h o w i n g t h e W o r l d VER 1.0...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shook, lighting strikes, etc. -
Page 3: Introduction
⑤ 1x Button label ⑥ 1x Power adapter (12VDC 1A) ⑦ 1x User manual Note: Please confirm if the product and the accessories are all included, if not, please contact with the dealers. Website: www.seada.co.uk 2 / 26 E-mail: sales@seada.co.uk... -
Page 4: Panel Description
6 crystal and luminescent buttons, programmable functions can be customized via the Control Software. Each label within a button can be easily changed. Simply select the label you need and change it as shown below: Button Website: www.seada.co.uk 3 / 26 E-mail: sales@seada.co.uk... -
Page 5: Rear Panel
RJ45 connector for connecting PC to run the Control Software to customize the programmable functions for all ETHERNET buttons. After buttons programming, the RJ45 connector should be connected to the third-party device which needs Website: www.seada.co.uk 4 / 26 E-mail: sales@seada.co.uk... - Page 6 IR database. Press and hold this button for 3 seconds until the power LED goes out. Then the LED will light up while the device is RESET restored to factory defaults successfully. Website: www.seada.co.uk 5 / 26 E-mail: sales@seada.co.uk...
-
Page 7: System Connection
Note: The control PC can be directly connected to the TCP/IP port of SDCP9 to customized button functions. After buttons programming, disconnect the PC, and then connect the third-party device to the TCP/IP port. Website: www.seada.co.uk 6 / 26 E-mail: sales@seada.co.uk... -
Page 8: Control Software
Installation/uninstallation of Control Software: Installation: Copy the software package to the control PC. Uninstallation: Delete all the software files in corresponding file path. Double-click the below icon to run this software: Website: www.seada.co.uk 7 / 26 E-mail: sales@seada.co.uk... - Page 9 Show all events for the selected key Show all events for the selected key Set events for the selected button Set events for the selected key action. action. action. Website: www.seada.co.uk 8 / 26 E-mail: sales@seada.co.uk...
- Page 10 Click any button to set key actions, refer to 4.2 Panel Set. Select any key action, refer to 4.3 Action List. Set the button functions for the selected key action, refer to 4.4 Event Setting and 4.5 Event List. Website: www.seada.co.uk 9 / 26 E-mail: sales@seada.co.uk...
-
Page 11: Panel Set
Release: Execute events when release button. Toggle: The button can be regard as composite key, press and press again to execute different events. Built key group for LED setting. Website: www.seada.co.uk 10 / 26 E-mail: sales@seada.co.uk... -
Page 12: Action List
4.3 Action List All key actions will be shown on the below action list. Empty all actions. Delete the selected action. Delete all invalid actions which have no events. Website: www.seada.co.uk 11 / 26 E-mail: sales@seada.co.uk... -
Page 13: Event Setting
Set the “Lib Name” and “Lib Function” as needed. Select the RS232/485 port. Confirm and set the baud rate, data bit, stop bit and parity. Type RS232 command in data box, and then press “add” to save. Website: www.seada.co.uk 12 / 26 E-mail: sales@seada.co.uk... - Page 14 Note: Once set up, please press “Save” to save the setting or press “Save as” to save the setting as a file, and then press “OK”. The number of transmission strings and the delay time between strings can be set. Website: www.seada.co.uk 13 / 26 E-mail: sales@seada.co.uk...
-
Page 15: Ir Setting
4.4.2 IR Setting This item is used for setting the events of the selected key action to control the third-party device through IR (1~2) ports. Website: www.seada.co.uk 14 / 26 E-mail: sales@seada.co.uk... - Page 16 Note: The IR learning mode will be exit automatically while if no operation within 3 seconds. Note: Once set up, please press “Save Edit” to save the setting or “Save as” to save as a file, and then press “OK”. Website: www.seada.co.uk 15 / 26 E-mail: sales@seada.co.uk...
- Page 17 The number of transmission strings and the delay time between strings can be set. Website: www.seada.co.uk 16 / 26 E-mail: sales@seada.co.uk...
-
Page 18: Tcp/Ip Setting
4.4.3 TCP/IP Setting This item is used for setting the events of the selected key action to control the third-party device through TCP/IP port. Type the IP address of third-party device. Type the control command. Website: www.seada.co.uk 17 / 26 E-mail: sales@seada.co.uk... -
Page 19: Delay Setting
3 seconds, it means that the first event starts executing at 12:00:00, followed by the second event executing at 12:00:00:03. The delay time setting showed as below: Hour: 0~23 Minute: 0~59 Second: 0~59 Website: www.seada.co.uk 18 / 26 E-mail: sales@seada.co.uk... -
Page 20: Compare Setting
Add an event that the LED lights up to indicate the comparison result. The executing priority of events in event list is from top to bottom, so that the comparing function can be used for the key action which with three or more events. Website: www.seada.co.uk 19 / 26 E-mail: sales@seada.co.uk... -
Page 21: Led Setting
On/Other off: Switch on the LED of the selected Key1 and switch off the others. ③ On/Group off: Switch on the LED of the selected Key1 and switch off the others in ④ the same group. Website: www.seada.co.uk 20 / 26 E-mail: sales@seada.co.uk... -
Page 22: Toggle Setting
The key action type can be set as “Toggle” that enable the button to be a composite key. Here take Key1 as an example to introduce the “Toggle Setting”. Operation procedure: Click “1” and set its key type as “Toggle”. Website: www.seada.co.uk 21 / 26 E-mail: sales@seada.co.uk... - Page 23 Add toggle & RS232 events for the key action. Press the button 1 to execute the second event, and then press again to execute the fourth event. Website: www.seada.co.uk 22 / 26 E-mail: sales@seada.co.uk...
-
Page 24: Event List
If there is an event execute incorrectly, all subsequent events will not be executed. Delete the selected event. Adjust the execution order for events. Empty all events. Website: www.seada.co.uk 23 / 26 E-mail: sales@seada.co.uk... -
Page 25: Specification
-10 ~ +55℃ Operation Temperature -25~ +70℃ Storage Temperature Relative Humidity 10% ~ 90% Input: 100VAC~240VAC, 50/60 Hz; Power Supply Output: 12VDC 1A Net Weight About 300g Dimension（W*H*D） 151mm x 80mm x 38mm Website: www.seada.co.uk 24 / 26 E-mail: sales@seada.co.uk... -
Page 26: Panel Drawing
6. Panel Drawing DISPLAY ON DISPLAY OFF VOLUME MUTE 38 mm 35 mm 151 mm IR(1) IR(2) SDCP9-EU DISPLAY ON DISPLAY OFF VOLUME MUTE 38 mm 35 mm 146 mm IR(1) IR(2) SDCP9-UK Website: www.seada.co.uk 25 / 26 E-mail: sales@seada.co.uk...
Need help?
Do you have a question about the SDCP9 Series and is the answer not in the manual?
Questions and answers