Table of Contents
Advertisement
Industrial Box Thin Client
Installation
3
Installation
3.1
Mounting
Warning!
Install the device in accordance with the instructions by competent personnel. Observe
national laws and regulations.
Attaching Brackets to the Steel Base
There are two brackets that you attach to the steel base so that you can mount the unit on the
wall. The unit must be mounted so that the heat fins are vertical to allow for proper convection
cooling.
Warning!
Hot surface
The surface of the unit can be hot when system is in use.
Attaching Brackets
1. Remove the feet
1
Figure 3.1
from the steel base.
1
11
Advertisement
Table of Contents
