Toshiba eStudio 205L Printing Manual page 99

3.PRINTING FROM MACINTOSH
2) Hole Punch
This option sets whether or not a print job is hole punched.
- Off — Select this option to print without hole punches.
- Long Edge Punch without rotation — Select this option to create holes on the left side for a portrait document, or
on the top for a landscape document.
- Short Edge Punch without rotation — Select this option to create holes on the top for a portrait document, or on
the right for a landscape document.
- Long Edge Punch with 180 degree rotation — Select this option to create holes on the right side for a portrait
document, or on the bottom for a landscape document.
- Short Edge Punch with 180 degree rotation — Select this option to create holes on the bottom for a portrait
document, or on the left for a landscape document.
This option can be selected when the Hole Punch Unit (optional) is installed.
3) Stapling
This option sets whether a print job is stapled.
- Off — Select this option to print without stapling.
- Upper Left (Portrait) / Upper Right (Landscape) — Select this option to staple on the upper left for a portrait
document, or on the upper right for a landscape document.
- Middle Left (Portrait) / Middle Top (Landscape) — Select this option to double staple on the left for a portrait
document, or on the top for a landscape document.
Printing from an Application on Mac OS X 10.2.4 to Mac OS X 10.5.x
3 PRINTING FROM MACINTOSH
97