4. Move and Installation
4-2 Installation
This section shows how to install FC-20A.
1.
Attach four connectors from FC-20A to
SPF-20A.
NOTE
- Correspond the number of connectors with
that of receptacles.
2.
Place mount bases on the floor where
adjust bolt on FC-20A is positioned.
3.
Insert positioning pin into SPF-20A
holes.
4.
Remove trimmings box, attach adjust
bolts and fix them.
FC-20A
Connectors
Trimmings Box
22
SPF-20A
Positioning Pin
Adjust Bolt