NETGEAR M4300 Intelligent Edge Series Hardware Installation Manual page 2

M4300 Intelligent Edge Series Fully Managed Stackable Switches
Support
Thank you for purchasing this NETGEAR product. You can visit
https://www.netgear.com/support/ to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you use
only official NETGEAR support resources.
Compliance and Conformity
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Do not use this device outdoors. The PoE source is intended for intra building connection
only.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc.
Any non-NETGEAR trademarks are used for reference purposes only.
Revision History
Publication Part Publish Date
Number
202-12073-01 January 2020
202-11995-02 November 2019
202-11995-01 September 2019
202-11606-05 May 2018
202-11606-04 January 2017
202-11606-03 July 2016
Comments
The CD is no longer shipped with product. Removed info on CD.
Updated branding.
Updated support and compliance section.
For all models, changed the Fan LED behavior for a faulty fan condition from
blinking yellow to solid yellow.
Made minor corrections to existing sections.
Added switch models M4300-16X, M4300-24XF, and M4300-48XF.
Made minor corrections to existing sections.
Published the guide in a new format.
Added information about the location of the SFP+ ports on model M4300-24X.
Updated the SFP+ Ports for 10GBASE-X and 1000BASE-X Transceiver Modules
and Cables section.
Updated the RJ-45 Ports, Including 10GBASE-T RJ-45 Ports section, including
information about some limitations for half-duplex mode for certain models.
Added the Cables and Speed section.
Made multiple corrections and refinements.
Updated Figure 17.
Added notes to the Install Two Half-width Switches in a Rack section.
Updated figures with model M4300-24X.
Added the Optional Step 11: Replace a Half-width switch in a Rack section.
Added switch models M4300-24X and M4300-48X.
2