Advertisement
10. Separate the pocket from the radio by
removing the two self-tapping screws.
POCKET
(Discard.)
11. Remove the four self-tapping screws, and
remove and discard the existing radio brackets
from the center panel. Retain the four
self-tapping screws.
CENTER PANEL
SELF-TAPPING
SCREW
(Reuse.)
4 of 5
RADIO
BRACKET
(Discard.)
SELF-TAPPING
SCREW
(Discard.)
SELF-TAPPING
SCREW
(Reuse.)
RADIO
BRACKET
(Discard.)
12. Attach the new left and right brackets to the
center panel using the self-tapping screws
removed in step 11.
CENTER PANEL
13. Place the radio onto the cassette player. Slide
the radio assembly into the center panel, and
install the eight washer-bolts (four removed in
step 9, and four provided with the cassette
player).
RADIO
CASSETTE
PLAYER
SCREWS
(reused)
5 x 8 mm
WASHER-SCREWS
(Included in the
Cassette Player.)
AII 20248 (9812)
LEFT BRACKET
SELF-TAPPING
SCREW
(reused)
SELF-TAPPING
SCREW
(reused)
RIGHT BRACKET
CENTER
PANEL
LEFT
BRACKET
RIGHT
BRACKET
1998 American Honda Motor Co., Inc. – All Rights Reserved
SCREWS
(reused)
5 x 8 mm
WASHER-
SCREWS
(Included in
the Cassette
Player.)
Advertisement
