118
Learning the Basics
Using Hibernation
Sample TOSHIBA Power Saver Properties window
4
Click the Hibernate tab, then click the Enable
hibernate support check box.
5
Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Going into Hibernation mode
If you are using the Windows
or are using the Windows
not a member of a domain, power off the computer using the
Hibernation command as follows:
1
Click Start, Turn off computer.
2
Hold down the shift key and click Hibernate
("Hibernate" only appears when the shift key is pressed).
®
XP Home operating system,
®
XP Pro operating system and are