Toshiba Satellite 2450 User Manual page 127

1. Hold down F12 and boot the computer.
2. The following menu will be displayed with the following icons: Built-in HDD,
Slim Select Bay HDD, CD-ROM, FDD, Network (LAN), PCA (ATA) card boot.
NOTE: A bar will appear only under the selected device.
3. Use the left/right cursor keys to highlight the boot device you want and press
Enter.
NOTES: 1. If a supervisor password is set, the menu above does not
appear when you use the user password to start the
computer.
2. The selection method above does not change the boot
priority settings in HW Setup.
3. If you press a key other than one of those above or if the
selected device is not installed, the system will boot according
to the current setting in HW Setup.
4. Support of PCA (ATA) card boot is guaranteed only for
TOSHIBA PC card HDDs.
5. A PCA (ATA) card takes the position of HDD in the Boot
Priority Options list.
HDD Priority Options
If more than one HDD is installed in the computer, this option lets you set the
priority for HDD detection. If the first detected HDD has a boot command, the
system will boot from the HDD.
Built-in HDD
2nd HDD Built-in HDD
2nd HDD PC Card (Default)
HDDs are searched for a boot command in the following
order: the built-in HDD, the HDD installed in the Slim
Select Bay and the PC card. (Default)
PC Card
HDDs are searched for a boot command in the following
order: the HDD installed in the Slim Select Bay, the built-in
HDD and the PC card.
HW Setup
7-3