Safety Instructions - SAINT-GOBAIN ABRASIVES Norton Clipper CG 250 E Operating Intructions

Table of Contents

Advertisement

The following sticker is placed on the machine.
Meanings of these symbols are:
Ear protection is obliged
Safety glasses with lateral protection are obliged
CE-mark on this machine
Safety shoes obliged
Consult the manual before operating the machine
Personnel must tie back long hair and not wear loose clothing or jewellery including rings.
Wear gloves and dust mask during operating the machine.

Safety instructions

Do not stand the machine on the diamond disc or coupling when it is not in use, this will cause
deformation to the flexible coupling. Put the machine always on the support which is made for this
reason.
Make sure the machine is clean and that the handgrips are dry and free of grease and oil.
Make sure the brush seals are in good condition, this to avoid dust.
Pull out the main plug when changing the disc or flexible coupling.
It is not allowed to lift the machine without use of appropriate appliances as a lift or crane.
Lift the machine up like it is shown in the picture below by point 2.
6

Advertisement

Table of Contents
loading

Table of Contents