Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SAINT-GOBAIN ABRASIVES NORTON clipper CS 451 P14 Kohler
Summary of Contents for SAINT-GOBAIN ABRASIVES NORTON clipper CS 451 P14 Kohler
- Page 1 CS 451 P14 Kohler OPERATING INSTRUCTIONS Translation of the original instructions...
- Page 2 VERS.2021.09.28 CS451_MAN_EN...
- Page 3 Valid for machines as of serial number: 211000010 Storage site for the technical documents: Saint-Gobain Abrasives 190, Bd. J. F. Kennedy 4930 BASCHARAGE, LUXEMBOURG This declaration of conformity loses its validity when the product is converted or modified without agreement.
- Page 4 Valid for machines with a serial number greater than: 211000010 Authorised Representative: SAINT-GOBAIN ABRASIVES Unicorn House • Unit 1, Amison Close Redhill Business Park • Stafford • England • ST16 1WB This declaration of conformity loses its validity when the product is converted or modified without agreement.
-
Page 5: Table Of Contents
VERS.2021.09.28 CS451_MAN_EN CS 451 P14 Kohler OPERATING INSTRUCTIONS AND SPARE PARTS LIST 1 BASIC SAFETY INSTRUCTIONS 1.1 Symbols 1.2 Machine plate 1.3 Safety instructions for particular operating phases 2 GENERAL DESCRIPTION OF THE CS 451 2.1 Short description 2.2 Layout 2.3 Technical data 2.4 Statement regarding the vibration emission 2.5 Statement regarding noise emission... -
Page 6: Basic Safety Instructions
VERS.2021.09.28 CS451_MAN_EN 1 BASIC SAFETY INSTRUCTIONS The CS 451 is exclusively designed for the cutting of floors made of asphalt, green and cured concrete (reinforced or not) as well as of industrial cement. Uses other than the manufacturer's instructions shall be considered as contravening the regulations. The manufacturer shall not be held responsible for any resulting damage. -
Page 7: Machine Plate
VERS.2021.09.28 CS451_MAN_EN Rotation of the wheel in the indicated Rotation of the wheel in the indicated direction lowers the blade direction raises the blade Never move the machine with the blade Rotation direction of the blade running idle. Emergency Stop 1.2 Machine plate Important data can be found on the following plate located on the machine: Machine Model... -
Page 8: Safety Instructions For Particular Operating Phases
VERS.2021.09.28 CS451_MAN_EN 1.3 Safety instructions for particular operating phases Before commencing work Before commencing work, make yourself familiar with the working environment at the place of use. The working environment includes: obstacles in the area of work and manoeuvre, the firmness of the floor, necessary protection at the site relating to public thoroughfares and the availability of help in the event of accidents. -
Page 9: General Description Of The Cs 451
Any modification, which could lead to a change in the original characteristics of the machine, may be done only by Saint-Gobain Abrasives S.A. who shall confirm that the machine is still in conformity with the safety regulations. Saint-Gobain Abrasives S.A. keeps the right of making technical or design modification without prior notification. -
Page 10: Layout
VERS.2021.09.28 CS451_MAN_EN 2.2 Layout Made of jig welded open profile steel, the CS 451 is stable but at the same time, easily transportable. The one-piece blade guard (1) fully protects the operator and his working environment. It is firmly fixed to the main frame but can be opened by rotation to change blades. A manually operated hand wheel mechanism (2) enables graduated depth setting. - Page 11 VERS.2021.09.28 CS451_MAN_EN The precisely manufactured blade shaft is fitted into two heavy-duty self-aligning pillow block bearings, including grease nipples. On one end is a Poly-V pulley with taper lock and on the other end the shaft is reduced to 25,4mm, allowing an inner flange to be fixed. Outer flange is assembled on the shaft with a 36mm locking nut.
-
Page 12: Technical Data
VERS.2021.09.28 CS451_MAN_EN 2.3 Technical data Engine Kohler CH440, 4 stroke, 1 cylinder, 14HP (10,5kW) Fuel Automotive unleaded gasoline with a pump octane rating of 86 or higher (research octane rating of 91 or higher) Honda 4-Stroke, or equivalent high detergent, premium quality motor oil certified to meet or exceed U.S. -
Page 13: Statement Regarding The Vibration Emission
VERS.2021.09.28 CS451_MAN_EN 2.4 Statement regarding the vibration emission Declared vibration emission value in accordance with EN 12096 Machine Measured vibration Uncertainty K Tool used Model / code emission value a m/s Model / code CS 451 P14 Duo Extreme Ø350x25.4 70184631908 ... -
Page 14: Statement Regarding Noise Emission
VERS.2021.09.28 CS451_MAN_EN 2.5 Statement regarding noise emission Declared value of noise emission following EN ISO 11201 and NF EN ISO 3744. Machine Sound Uncertainty K Sound power Uncertainty K Model / code Pressure level (Sound level (Sound power level Pressure level EN ISO 11201 NF EN ISO 3744 NF EN ISO 3744) -
Page 15: Assembly And Commissioning
VERS.2021.09.28 CS451_MAN_EN 3 ASSEMBLY AND COMMISSIONING Before beginning the work with the CS 451, you have to assemble some parts. 3.1 Operator’s handle assembly Secure the operator’s handle in a comfortable user position by using the locking screws. 3.2 Tool assembly Only NORTON blades with a maximum diameter of 450 mm can be fitted on the CS 451. -
Page 16: Starting The Machine
VERS.2021.09.28 CS451_MAN_EN 3.4 Starting the machine Make sure the blade is raised clear up the ground before starting the machine. 1. Turn fuel shut-off valve to ON position (if equipped). 2. Turn engine on/off switch to ON position (if equipped). 3. -
Page 17: Transport And Storing
VERS.2021.09.28 CS451_MAN_EN 4 TRANSPORT AND STORING Take the following measures in order to transport and store the CS 451 securely. 4.1 Securing for transport Before transporting the machine: Remove the blade. Empty the water tank. Lower the handle in its fixing tube and secure it using the locking screws. ... -
Page 18: Operating The Cs 451
VERS.2021.09.28 CS451_MAN_EN 5 OPERATING THE CS 451 5.1 Site of work Before you start working, please check the following points: Remove from the site anything, which might hinder the working procedure. Make sure the site is sufficiently well lit. ... - Page 19 VERS.2021.09.28 CS451_MAN_EN 5.2.2 Cutting the floor You can now start the engine. To make your cut, Turn the depth hand wheel until the blade slightly touches the floor. Open water valve to control the amount of water required for the type of blade, using 15 to 25l/min for wet cutting and 1-2l/min for dry cutting (dust control).
-
Page 20: Maintenance And Service
VERS.2021.09.28 CS451_MAN_EN 6 MAINTENANCE AND SERVICE CAUTION: to perform maintenance of the machine, always switch it off. Always wear a mask and safety goggles while performing the maintenance of machine. 6.1 Maintenance of the machine To ensure a long-term quality from the cutting with the CS 451, please follow the maintenance plan below: Regular service period Perform... -
Page 21: Maintenance Of The Engine
VERS.2021.09.28 CS451_MAN_EN 6.2 Maintenance of the engine Maintenance Schedule After first 5 Hours ● Change engine oil (NOT required if using KOHLER PRO 10W-50 full-synthetic oil). Every 8 Hours ● Check oil bath air cleaner oil level in oil reservoir cup (if equipped). Every 50 Hours ●... - Page 22 VERS.2021.09.28 CS451_MAN_EN Oil Recommendations All-season KOHLER® PRO 10W-50 Synthetic Oil is the ideal oil for KOHLER engines. It is specifically formulated to extend the oil change interval to 300 Hours. Contact your Kohler authorized dealer for availability. 300-Hour oil change intervals are exclusive to and only authorized on KOHLER engines that utilize the KOHLER PRO 10W-50 Synthetic Oil.
- Page 23 VERS.2021.09.28 CS451_MAN_EN Add Fuel Nominal Fuel Tank Volume: CH395/CH440 : 7.19 qt. (6.8 L) Ensure engine is cool. 1. Clean area around fuel cap. 2. Remove fuel cap. Fill to base of filler neck. Do not overfill fuel tank. Leave room for fuel to expand. 3. Reinstall fuel cap and tighten securely. Fuel Valve Engines are equipped with a fuel valve and integral screen filter located at inlet of carburetor.
- Page 24 VERS.2021.09.28 CS451_MAN_EN Oil Bath Some engines are equipped with an oil bath air cleaner. Follow maintenance and oil change information specified in this section and in Maintenance Schedule. Move bails on air cleaner cover down; remove latches from under tabs on base; remove cover. 1.
-
Page 25: Breakdowns : Causes And Cures
VERS.2021.09.28 CS451_MAN_EN 7 BREAKDOWNS : CAUSES AND CURES 7.1 Breakdown-finding procedures Should any breakdown occur during the use of the machine, turn it off. Let only qualified staff make any intervention other than the ones described in the previous section. 7.2 Trouble-shooting guide... -
Page 26: Customer Service
In the case of a warranty claim, the part must always be returned for evaluation. Spare parts for the engine can be ordered with the manufacturer of the engine or with their dealer, which is often quicker and cheaper. This machine has been manufactured by Saint-Gobain Abrasives S.A. 190, Bd J.F.Kennedy L- 4930 BASCHARAGE Grand-Duché... -
Page 27: Spare Parts
VERS.2021.09.28 CS451_MAN_EN 7.4 Spare parts In order to consult the spare parts lists, we invite you to visit the after-sales website of Norton Clipper by using the following address: https://spareparts.nortonabrasives.com For a quick access, you can also use the QR Code shown below using your mobile phone: This electronic catalogue provides exploded views and spare parts lists for different machines designed by Norton Clipper so you can find references you need. - Page 28 TEL: +39 02 44 851 STR. CAREIULUI 11 FAX: +39 02 44 78 266 PARC INDUSTRIAL RENOVATIO ROMANIA SAINT-GOBAIN ABRASIVES, S.R.O. SAINT-GOBAIN ABRASIVES S.A. TEL: +40 261 839 709 POČERNICKÁ 272/96, MALEŠICE 190 RUE J.F. KENNEDY FAX: +40 261 839 710...