NorthStar HORIZON Manual page 24

P44. Slip end A of wire #29 onto the left lug
(#1)
of the reset
switch. Slip end A of wire #28 onto the center (#2) of the
reset switch. Twist wires #28 and #29 together and route
them under the fan and to the left. They will be attached
to the motherboard later.
P45. Attach the back panel to the chassis frame using seven 6-
32x3/8" machine screws and lock washers such that the
following order results from back to front: machine screw
head. lock washer. back panel. and chassis frame. Leave the
machine screws loose for now. They will be tightened during
chassis assembly .. Route the power supply wires so they will
not interfere with the free rotation of the fan. The seven
unattached power supply wires should be routed over the back
panel to the rear for now.
The POw€ r suppl y is now assembled.
Assembly section.
Proceed to the Motherboard
North Star HORIZON Computer 24