Checking The Setup Condition; System Information - JRC JHS-800S Instruction Manual

6.4

Checking the setup condition

The system information can be confirmed for use in maintenance and inspection.
6.4.1

System information

The following describes the procedure to display such as the ID numbers or peripheral connection
conditions.
■ ■
Procedure
1 1 . .
1 .
From the main menu, touch the [MAINT]→ [SYSTEM
INFO] buttons.
Note
The confirmable information are as below.
Item Name
SELF-ID Own ship's identification number (MMSI)
ATIS-ID The ATIS number for European inland waterways
The number of connected controllers
NUM OF CTLRS
Number of main unit and connected controllers
OWN CTLR ID The address number of this controller
WKR The setting status to use the watch-keeping receiver
PRIORITY CH The registered priority channel number
The setting status to monitor communications of a
TX MONITOR controller at the other controllers and the external
speaker
The AIS connection status
AIS INFO
(RECEIVING/DISRUPTED/INVALID)
The BAM connection status (NORMAL/CS
BAM INFO
ERROR/INVALID)
S/N(RT) Device's serial number
S/N(OWN) Device's serial number (Only for the controller.)
PRN FUNC The setting status to use the printer functions
PRN PORT Printer's port number
UDP IP ADDR Device's UDP IP address
ETH IP ADDR Device's IP address
ETH MAC ADDR Device's MAC address
BT PAIRING Names of devices paired with Bluetooth
BT MAC ADDR Bluetooth's MAC address
The identification number of the group own ship
GROUP-ID xx
belongs to
Contents
Maintenance & Inspection
Notes
Default setting: Valid
Default setting: CH16
Default setting: ON
Default setting: OFF
xx: 01 - 20
6-7