Table of Contents
Advertisement
Setting Password
You can protect data or settings from a third person by setting a
password which is requested when turning power on.
1
Tap
2
Select the type of password you would like to use.
3
Enter a password and tap OK.
4
Tap YES on the confirmation screen. The password is saved and the
screen returns to the Personal tab screen
If you tab YES on the confirmation screen to return to the Personal tab
screen, it becomes necessary to enter the password even for displaying
the Password setting screen.
In case you forget the password, it is necessary to initialise the Pocket PC.
Please note that when initialisation is executed, data or settings stored in
the Pocket PC are all deleted.
To Set Screen light
You can set the screen brightness for better sight according to a place of
use. You can also set the time that elapses until the screen light turns off
automatically after the last operation.
1
Tap
2
Set the Screen light on battery power.
User's Manual
and then Settings. On the Personal tab, tap Password.
and then Settings. On the System tab, tap Screen light.
Check to activate power save mode. It will make
the screen light turn off automatically when the
Pocket PC has not been used for a user-set
amount of time.
Set the time that elapses until the screen light
turns off automatically.
Check to make the screen light turn on
automatically when a button is pressed or the
screen is tapped.
Basic Skills
2-27
Advertisement
Table of Contents
