Initial Setup - Toshiba e350 User Manual

Initial Setup

When using the Toshiba Pocket PC for the first time, follow the initial
setup procedures below after the battery has been charged.
Move the battery switch to the "supply" position. The Toshiba
1
Pocket PC powers on automatically and the Welcome screen
appears. Tap the screen to start the following setup.
2 Execute touch screen correction.
When the align screen appears, tap the centre of the cross target with
the stylus. The next target position changes upon tapping the target.
Five taps complete the positioning correction. The screen then
changes to the Stylus screen.
■
3 Read how to use the stylus.
■
For more information on stylus operation, see "How to Use the Stylus" in
this chapter.
Learn the pop-up menu operation.
4
■
■
5 Set the TIME ZONE.
■
■
6 Complete the initial setup.
■
■
When you tap the Complete screen, the Today screen appears. For more
information on the Today screen, see "Today screen" in this chapter.
User's Manual
If a finger or any other object touches the screen during correction,
the correction will be cancelled. Repeat the correction procedure.
Read and understand the stylus operation, and then tap NEXT.
Read the on-screen explanation and then follow the instructions.
Display the pop-up menu, and cut and paste the data according to
the screen instructions.
After you finish the paste operation, this stage is completed. Tap
NEXT.
When tapping the right
appear. Tap the desired city and time zone.
When the setup is completed, tap NEXT.
When the Complete screen appears, the initial setup is completed.
After tapping the screen, you can use the Toshiba Pocket PC.
mark, the city and the time zone lists
Basic Skills
2-8