"Remove the lower case" on page 26
"Remove the battery pack" on page 27
Step 1.
Disconnect the wireless antenna cables from the WLAN card and remove one screw.
Figure 6. Disconnect the wireless antenna cables and remove one screw
Screw specifications
M2.0 x 3
Step 2.
Pull the WLAN card out of the slot.
Figure 7. Pull the WLAN card out of the slot
Go to
https://support.lenovo.com/partslookup
part:
WLAN card
Number of screws
1
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
29