PRODUCT SPECIFICATIONS
Cordless Line Trimmer
Model
Voltage
No-load speed
Cutting line diameter
Cutting capacity
Vibration level (in accordance with EN 50636-2-91:2014 Annex
CC)
Rear handle
Front handle
Uncertainty of measurement
Noise emission level (in accordance with EN 50636-2-91:2014
Annex CC)
A-weighted sound pressure
level at operator's position
Uncertainty of measurement
A-weighted sound power level
Uncertainty
Weight (with harness, without
battery and charger)
Weight (with harness, with
heaviest battery pack)
Maximum weight (with harness,
battery, and charger)
BATTERY AND CHARGER
Model
RY36LT33A
Battery pack
Weight
Charger
BPL3615, BPL3626, BPL3626D2,
Compatible battery
BPL3640, BPL3626D, BPL3640D,
packs
BPL3640D2, BPL3650D, BPL3650D2
BCL3620, BCL3620S, BCL30F,
Compatible charger
REPLACEMENT PART
RAC102, RAC103, RAC133, RAC142,
Complete spool
RY36LT33A / RY36LT33A-120
36V d.c.
6,400 – 7,400 min-1
2.0 mm
28-33 cm
1.9 m/s
2
5.2 m/s
2
1.5 m/s
2
84.3 dB(A)
2.5 dB
93.6 dB(A)
2.5 dB
2.8 kg
5.6 kg
5.0 kg
RY36LT33A-120
-
BPL3626D2
-
1.43 kg
-
RY36C17A
RY36C17A, RY36C60A
RAC143
VIBRATION LEVEL
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a preliminary
assessment of exposure.
The vibration emission during actual use of power tool can
differ from the declared total value depending on the ways
in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time.