Advertisement
In addition to these general mounting
instructions, please refer to the fitting
instructions, where the individual drilling
dimensions for the cabinet bottom, cabinet
top, side walls and cabinet doors are specified.
Frameless Cabinets:
The standard specification
includes a steel top mounting
bracket. The fitting has a
door lowering device
included which lowers the
door automatically during
opening. The door lowering
device permits small gaps
between the door and the
countertop.
Top mounting bracket (if specified)
Distance plates (spacers)
(are specified)
Upper pole bearing
Upper fastening wedge
(optional)
Upper shelf
(optional)
Upper door holder
Lower fastening wedge
(optional)
Lower shelf
(optional)
Lower door holder
Connection rods
Bottom of cabinet
Example shows one shelf option.
These instructions also indicate if additional
adjustments to the cabinet design are neces-
sary. Please contact your Häfele Hardware
Consultant if fitting specifications are neces-
sary.
Securing Pin
Upper door
bracket
Lower door
bracket
Cam plate
2
Face Frame cabinets:
The standard specification
is without a top mounting
bracket. The pole bearing is
attached to the cabinet top.
No lowering device is needed.
Upper locating pin
Lower locating pin
Securing cap
Advertisement
