Troubleshooting - Toshiba gigabeat MEG-F20 Owner's Manual

Troubleshooting

If you experience any of the following issues while using the gigabeat, check the
following guide for the possible cause before requesting service.
Issue
The gigabeat
doesn't power up.
The button doesn't
work.
The battery is con-
sumed quickly
after charge.
Playback cannot
be performed.
There is no sound. The EARBUDS are
Cause
The BATTERY switch
is set to "OFF".
There is insufficient
power remaining in
the built-in battery.
The gigabeat is in
HOLD mode.
The button is not
being pressed long
enough.
The gigabeat is con-
nected to a PC.
The built-in battery
has failed.
There is no track.
not connected prop-
erly.
The volume is set to
the minimum.
Solution
Set the BATTERY
switch to "ON".
Connect the AC adapter
and charge the built-in
battery.
Reset the HOLD switch
to cancel the HOLD
mode.
When turning on the
power, press the
POWER button for two
seconds or longer.
The gigabeat cannot be
operated while being
connected to a PC.
Replace with a new bat-
tery. To replace the
built-in battery, contact
TOSHIBA Customer
Service by calling.
Use gigabeat room to
transfer tracks.
Check the connection
between the EARBUDS
and main unit.
Adjust the volume.
145
Refer
> p. 24
> p. 24
> p. 20
> p. 27
> p. 29
> p. 15
> p. 45
> p. 62
> p. 66