Table of Contents
Advertisement
Description
Setting
Note
16/70
Siemens Building Technologies
HVAC Products
2.7
Parameter settings for the heating engineer
Room unit configuration and parameter settings to be made by the heating engineer.
Buttons
Explanation
1
Press one of the 2 line selection buttons.
This will take you first to the programming level
P R O G
"Enduser".
2
Press both line selection buttons for at least 3
seconds.
P R O G
This will take you to the programming level "Heating
engineer".
3
Press the line selection buttons to select the required
line.
P R O G
The parameter list on the next pages contains all
available lines.
4
Press the + or – button to set the required value.
The setting will be stored as soon as you leave the
-
+
programming mode or change to another line.
The parameter list on the next pages contains all
settings that can be made.
5
You leave the programming level "Heating engineer"
by pressing the Info button.
If no button is pressed for about 8 minutes, the room unit will automatically return to the
Info level.
Basic Documentation QAA73.110 Room unit
Error! Style not defined.
Line
1
51
51
. . .
98
Continuous
display
CE1P2284en
19.06.2002
Advertisement
Table of Contents
