fos4X Blackbird OECD Instructions For Use Manual
  1. Manuals
  2. Brands
  3. fos4X Manuals
  4. Measuring Instruments
  5. Blackbird OECD
  6. Instructions for use manual

fos4X Blackbird OECD Instructions For Use Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Blackbird OECD
Blackbird OECD
(12CH, CNO)
(12CH, CNO)
MDE1261
MDE1261
INSTRUCTIONS FOR USE
INSTRUCTIONS FOR USE
Product Type
Product Type
Product Version
Product Version
Document Version
Document Version
Issue Date
Issue Date
Language
Language
Measuring
Measuring
device
device
1.3.x
1.3.x
5.0
5.0
2020-02-07
2020-02-07
en-us
en-us

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Blackbird OECD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for fos4X Blackbird OECD

Summary of Contents for fos4X Blackbird OECD

  • Page 1 INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE Measuring Measuring Product Type Product Type Blackbird OECD Blackbird OECD device device Product Version Product Version 1.3.x 1.3.x (12CH, CNO) (12CH, CNO) Document Version Document Version MDE1261 MDE1261 Issue Date Issue Date 2020-02-07 2020-02-07...
  • Page 2 Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks has only descriptive character. Named trademarks are not part of any partnership or cooperation with fos4X. MDE1261_4-10_1.3.x_5.0_Blackbird 2 / 83 ©...

  • Page 3: Table Of Contents

    3.2.1 Measurement and Sensors..............13 3.2.2 Interfaces....................14 3.2.3 Optical Data....................15 3.2.4 Electrical Data..................15 3.2.5 Environmental Conditions..............15 3.2.6 Tested Standards and MTBF............... 16 3.2.7 Mechanical Data..................17 3.2.8 Dimensions....................17 MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 3 / 83 OECD_(12CH, CNO)-en-us...
  • Page 4 5.3 Connecting the Interfaces................53 5.4 Connecting the Power Supply................54 5.5 Connecting a Sensor..................55 Commissioning....................57 6.1 Commissioning the Ethernet Interface............57 6.2 Commissioning the CAN Interface..............57 6.3 Set or change the password................57 Operation......................60 MDE1261_4-10_1.3.x_5.0_Blackbird 4 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 5 9.2.1 Cleaning E-2000/APC Connections..........71 9.2.2 Replacing the PWR Connector............72 9.2.3 Replacing the CAN Connector............73 9.2.4 Firmware Update..................73 9.3 fos4X Support...................... 76 9.4 Spare Parts and Accessories................77 10 Taking out of Service and Disposal............... 78 10.1 Taking out of Service..................78 10.2 Disassembly......................

  • Page 6: About This Document

    The safety notes with the signal words Caution and Notice have the following meanings: CAUTION Risk which, if not avoided, could result in minor injury. NOTICE Risk which, if not avoided, will result in damage to property. MDE1261_4-10_1.3.x_5.0_Blackbird 6 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...

  • Page 7: Non-Safety-Related Information

    Name of a window or button in the software CONTROL ELEMENT Designation of a control element of the product Abbreviations Controller Area Network CANopen Direct Current DHCP Dynamic Host Configuration Protocol Ethernet MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 7 / 83 OECD_(12CH, CNO)-en-us...
  • Page 8 International Protection Light Emmiting Diode Maximum MTBF Mean Time Between Failures (CANopen) Network Management OECD Opto-Electronic Converter Device Personal Computer Single Mode Fiber SNTP Simple Network Time Protocol User Datagram Protocol MDE1261_4-10_1.3.x_5.0_Blackbird 8 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...

  • Page 9: Safety

    2 Safety Conformity The product is in conformity with the relevant Union harmonisation legislation. The EU Declaration of Conformity is available on request. Contact details see fos4X Support, page 76. 2.2 Changes to the Product Changes to the product may only be carried out by fos4X.

  • Page 10: Intended Use

    Disposal 2.4 Intended Use The measurement device Blackbird OECD is designed exclusively for the measurement of fiber optical sensors in industrial environments. Any other use or use going beyond this is considered improper use. 2.5 Residual Risks 2.5.1 Explosion Protection...

  • Page 11: Product Description

    2 E-2000 connectors 4 Data interfaces The Blackbird OECD consists of the following components: Mounting plate: Used to attach the Blackbird OECD with 4 M6 bolts or welding studs. E-2000/APC connectors: 12 sockets for the connection of fiber optical sensors with E-2000/APC connector.

  • Page 12: Operation

    Up to 12 fiber Bragg grating sensors are connected via fiber optical cables to the E-2000/APC connectors of the Blackbird OECD. The Blackbird OECD evaluates the signals of the sensors and provides the wavelengths of the individual sensors via the following interfaces:...

  • Page 13: Technical Data

    3 Time between power-up and operation within specification 4 Triggered by CANopen SYNC messages. Requirements for sensors Table 4: Requirements for sensors Property Value Unit Sensor type Fiber Bragg grating 70 ± 20 Reflectivity MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 13 / 83 OECD_(12CH, CNO)-en-us...

  • Page 14: Interfaces

    3. Product Description Property Value Unit Full width half maximum (FWHM) 400 ... 600 Side lobe suppression > 12 Compatible sensors from fos4X Table 5: Compatible sensors from fos4X Measurand Sensor fos4Strain Strain fos4Strain expert fos4Acc 1D Vibration fos4Acc 2D...

  • Page 15: Optical Data

    Electrical connector MC 1,5/ 2-GF-3,81 3.2.5 Environmental Conditions Table 10: Environmental Conditions Property Value Unit IP protection class IP20 Maximum operating altitude 3000 Permitted temperature -40 … +85 °C (Transport and storage) MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 15 / 83 OECD_(12CH, CNO)-en-us...

  • Page 16: Tested Standards And Mtbf

    IEC 60068-2-27, 10 g in all directions Vibration IEC 60068-2-6, 2 g IEC 60068-2-1 Class 3M6 Temperature IEC 60068-2-2 Class 3M6 Electromagnetic Compatibility IEC 61326-1, EN 55032 MTBF Table 12: MTBF Property Value Unit MTBF > 100000 MDE1261_4-10_1.3.x_5.0_Blackbird 16 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...

  • Page 17: Mechanical Data

    3. Product Description 3.2.7 Mechanical Data Table 13: Mechanical Data Property Value Unit Length Height Width Total weight * Blackbird OECD without packaging Table 14: Mounting Property Value Unit Mounting 4x M6 3.2.8 Dimensions Number of channels depends on the variant. MDE1261_4-10_1.3.x_5.0_Blackbird ©...
  • Page 18 3. Product Description Figure 5: Dimensions (front view) MDE1261_4-10_1.3.x_5.0_Blackbird 18 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 19 3. Product Description Figure 6: Dimensions (top view) MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 19 / 83 OECD_(12CH, CNO)-en-us...

  • Page 20: Markings On The Product

    Optional: Customer-specific ERP number: ERP 123456 GTIN: P/N: 4251112345678 3.4 Display and Control Elements 3.4.1 Status LEDs 3.4.1.1 LED Flashing Patterns The Blackbird OECD uses different LED flashing patterns to signal the device status. MDE1261_4-10_1.3.x_5.0_Blackbird 20 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 21 Description LED is continuously on Slow flashing Fast flashing Single flash Double flash Triple flash Quadruple flash 3.4.1.2 LEDs on the PWR connector There are 2 LEDs on the PWR connector. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 21 / 83 OECD_(12CH, CNO)-en-us...
  • Page 22 System not Identify Fast flashing adjusted The STATUS-LED flashes quickly every 4 s when in the state Table 18: STATUS-LED and device state Device state Description System healthy Normal operation MDE1261_4-10_1.3.x_5.0_Blackbird 22 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 23 Measurement error Temperature error Status is activated by a network Identify command. The blink pattern can be used to identify the Blackbird OECD. Error in the power supply System error Error in the light source General system error No adjustment for the OE chips...
  • Page 24 (1). In the right position, the terminating resistor is active. Run-LED Table 20: Run-LED on the CAN Connector State Device state Description After booting, if auto- operational is active Operational Set by Bus-Master MDE1261_4-10_1.3.x_5.0_Blackbird 24 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...

  • Page 25: Software

    Error with the connection to the CAN Bus off controller 3.5 Software 3.5.1 Factory Settings Table 22: Factory Settings Parameter Factory setting Static IP-address 198.168.44.44 MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 25 / 83 OECD_(12CH, CNO)-en-us...

  • Page 26: Web Interface

    The web interface is available via the following interfaces: Ethernet The web interface has the following functions: Monitoring of the system status of the Blackbird OECD and the connected sensors. Updating the firmware of the Blackbird OECD. Setting the configuration of the Blackbird OECD.
  • Page 27 Signals: Informations about the measurement channels Uptime: Operating time of the system. Informations about the system: Device Type: Type designation and version of the Blackbird OECD. System Information Serial Number: Serial number of the Blackbird OECD. Firmware Version: Currently installed firmware version.
  • Page 28 3. Product Description 3.5.2.2 System State The page SYSTEM STATE consists of the following pages: CAN STATE SIGNAL STATE HARDWARE STATE SYSTEM REBOOT CAN State Figure 12: CAN State MDE1261_4-10_1.3.x_5.0_Blackbird 28 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 29 Table 25: Signal State: Informations about each channel Column Content Channel Number of the channel. Wavelength Wavelength of the sensor. Signal value of the sensor: Reference (top) and Raw Signal Filter (bottom). State Status of the channel. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 29 / 83 OECD_(12CH, CNO)-en-us...
  • Page 30 Table 26: CAN State: Informations about the CAN interface Column Content Node State Status of the CANopen node. CAN Bus State Status of the CAN bus. Serial number Serial number of the Blackbird OECD. Software State Status of the software. Software Software Version: Temp Temperature. MDE1261_4-10_1.3.x_5.0_Blackbird 30 / 83 ©...
  • Page 31 Status of the laser of the light source. Current of the laser (top) and of the temperature Currents regulation of the laser (bottom). Software State Status of the software. Software Software Version: Temp Temperature. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 31 / 83 OECD_(12CH, CNO)-en-us...
  • Page 32 3. Product Description System Reboot Figure 15: System Reboot A restart of the Blackbird OECD system can be carried out by clicking on the PERFORM SYSTEM REBOOT button. MDE1261_4-10_1.3.x_5.0_Blackbird 32 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 33 The page VISUALIZATION graphically displays the wavelength curve of the connected sensors. The channels can be selected by clicking on the channel at Channel Selection. The current wavelengths for all channels are displayed in the Current Values section. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 33 / 83 OECD_(12CH, CNO)-en-us...
  • Page 34 System Name Set name of the system. System Location Set location of the system. With a click on the button EDIT the editing for System Name and System Location can be activated. MDE1261_4-10_1.3.x_5.0_Blackbird 34 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 35 Enabled: Displays if the system log is on. Syslog Server-IP: Current set server address for the system log. With a click on the button EDIT the editing for the settings can be activated. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 35 / 83 OECD_(12CH, CNO)-en-us...
  • Page 36 OECD is rebooted and then works in Ethernet mode. In Ethernet mode: With a click on the button SWITCH TO CAN MODE the Blackbird OECD is rebooted and then works in CAN mode. MDE1261_4-10_1.3.x_5.0_Blackbird 36 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 37 The page CAN BUS SETTINGS displays the information about the CAN bus. See System State, page 28. With a click on the button EDIT the editing for the following settings can be activated: Bitrate CANopen Node ID Auto-Operational Auto-Recover From Bus-OFF PDO Transmission Mode MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 37 / 83 OECD_(12CH, CNO)-en-us...
  • Page 38 The page CAN SIGNAL SETTINGS displays the CAN settings for each channel. See CANopen Objects, page 44. With a click on the button EDIT the editing for the following settings can be activated: Offset Scale Factor MDE1261_4-10_1.3.x_5.0_Blackbird 38 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 39 Displays if read access to the web interface is possible without password without password. With a click on the button CHANGE OR DISABLE PASSWORD the editing for the password settings can be activated. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 39 / 83 OECD_(12CH, CNO)-en-us...

  • Page 40: Signal Quality

    The page FIRMWARE UPDATE displays the following information: Current Firmware Version: Currently installed firmware version. In the section Firmware Update the firmware of the Blackbird OECD can be updated. See Firmware Update via Web Interface, page 73. 3.5.3 Signal Quality The values for the signal quality have the following meanings: Signal Good: Signal quality is good.

  • Page 41: Ethernet Interface

    Adjustment Missing No Signal Device Initializing 3.5.4 Ethernet Interface In Ethernet mode, the Blackbird OECD transmits the data in the form of UDP messages. Communication takes place via IPv6 link-local addresses. The fos4X multicast address ff02::13c is used for device recognition.

  • Page 42: Can Interface

    3. Product Description Two-Step or One-Step. Multicast-Scope 2 (Link-Local). Domain number 0. 3.5.5 CAN Interface Description In CAN mode the Blackbird OECD sends the data via the CANopen protocol. CiA Standards The following standards are used: Table 33: CiA Standards Standard Name CiA 301 CANopen application layer and communication profile...
  • Page 43 After each reception of a SYNC message, the Blackbird OECD sends several PDOs with the measurement data. no: PDOs are transmitted automatiucally every 10 ms. Rebooting the Blackbird OECD A reboot of the Blackbird OECD can be triggered with the NMT command Node Reset (0x81). 3.5.5.1 PDOs The Blackbird OECD transmits 4 PDOs.
  • Page 44 CANopen Objects 0x1009 Manufacturer hardware version The object Manufacturer hardware version (0x1009) contains from firmware version 2.69 the hardware version number of the Blackbird OECD as visible string. The hardware version number has the following format: <Major>.<Minor>.<Revision> 0x100A Manufacturer software version The object Manufacturer software version (0x100A) contains the firmware...
  • Page 45 No sensor detected on this channel. Sensor temporarily unavailable for measurement 0x8003 (light source regulates power). 0x8004 Sensor or channel error. 0x8005 … 0x800F Reserved. 0x2001 Status The Blackbird OECD has 4 status fields. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 45 / 83 OECD_(12CH, CNO)-en-us...
  • Page 46 Temperature At least one component is at the limit of its Warning permissible operating temperature. Counter bit. 12 … 15 Sync counter The counter bit is incremented at each Sync frame. MDE1261_4-10_1.3.x_5.0_Blackbird 46 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 47 Object 0x2002 contains the lower limit of the measuring range for all channels. Each sub-object of 0x2002 corresponds to one channel of the device. Example: 0x2002sub1 contains the value for the first channel. Object 0x2002 is read-only. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 47 / 83 OECD_(12CH, CNO)-en-us...
  • Page 48 0x2004sub1 contains the value for the first channel. Object 0x2004 is read-only. Sub-Objects All sub-objects are 32 bit unsigned integers. Sub-Objects for channels that are not present contain the value 0. MDE1261_4-10_1.3.x_5.0_Blackbird 48 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 49 The sub-objects contain the 20 bit fix point representation of the wavelength. To calculate the wavelength, the raw value must be divided by 1048576. Sub-Objects for channels that are not present contain the value 0. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 49 / 83 OECD_(12CH, CNO)-en-us...

  • Page 50: Packaging And Transport

    In the original packaging, the product is best protected for transport. The Blackbird OECD is packed in a box with foam inserts. One box contains up to 5Blackbird OECD. The box has the dimensions 645 x 492 x 216 mm (length x width x heigth).

  • Page 51: Packing

    Transporting the Blackbird OECD: Handle the Blackbird OECD with care during transport. Observe the transport conditions. See Environmental Conditions, page 15. Pack the Blackbird OECD in a transport packaging. See Packing, page 51. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 51 / 83...

  • Page 52: Storage

    4.6 Storage Storing the Blackbird OECD: Store the Blackbird OECD in a dry and clean place. Store the Blackbird OECD in a transport packaging. See Packing, page 51. Observe the environmental conditions. See Environmental Conditions, page 15. MDE1261_4-10_1.3.x_5.0_Blackbird 52 / 83 ©...

  • Page 53: Installation

    Attaching the measuring device in the control cabinet: Attach the measuring device with 4x M6 screws and nuts. Control cabinets from fos4X provide 4 welding studs to attach the measuring device with 4 x M6 nuts. 5.3 Connecting the Interfaces Connecting the Ethernet Interface: Connect a RJ45 cable to the ETH connector.

  • Page 54: Connecting The Power Supply

    GF-3,81 connector. Figure 26: PWR Observe the pin assignments (+) and (-) on the PWR connector connector. Connect the MC 1,5/ 2-GF-3,81 connector to the PWR connector. Switch on the power supply. MDE1261_4-10_1.3.x_5.0_Blackbird 54 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...

  • Page 55: Connecting A Sensor

    Clean sockets and plugs with a optical connector cleaner before connecting. The assignment of channels and sensors depends on the application of the Blackbird OECD. If available: Observe the color coding of the sensors and channels. Material and equipment...
  • Page 56 Close the protective cover (3). Connect the connector (2) to the socket (4). The connector (2) snaps into the socket (4) with a clicking sound. The sensor is connected. Repeat the procedure for all sensors. MDE1261_4-10_1.3.x_5.0_Blackbird 56 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...

  • Page 57: Commissioning

    6 Commissioning Observe the safety instructions. See Safety, page 9. Commissioning the Ethernet Interface For communication via the Ethernet interface, fos4X recommends the use of the fos4X C API. See fos4X C API documentation. 6.2 Commissioning the CAN Interface Conditions: Planned Node ID for the Blackbird OECD available.
  • Page 58 Figure 28: No password set Figure 29: Password set If no password is set: Click on CREATE PASSWORD. If a password is set: Click on CHANGE OR DISABLE PASSWORD. Figure 30: Setting a password MDE1261_4-10_1.3.x_5.0_Blackbird 58 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...
  • Page 59 Enter the new password in the field at Verify Password:. 10. Optional: Check the box at Read access without password. The option Read access without password allows read access to the web interface without password. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 59 / 83 OECD_(12CH, CNO)-en-us...

  • Page 60: Operation

    Observe the safety instructions. See Safety, page 9. Monitoring Operation In normal operation of the Blackbird OECD no operating actions are necessary. Monitor operation via an interface. See Software, page 25. Monitor operation via an interface or the web-interface. See Opening the Web Interface., page 60 and Software, page 25.
  • Page 61 Click on LOGIN. The page STARTING WEB APPLICATION is displayed. Figure 32: Initialization of the Web Interface Wait until the initialization is complete. The page HOME is displayed. Figure 33: Home page MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 61 / 83 OECD_(12CH, CNO)-en-us...

  • Page 62: Troubleshooting

    Tasks that are not described in these operating instructions may only be done by fos4X. 8.1 Troubleshooting PWR LED If the described options do not help to fix the problem: Contact fos4X Support. See fos4X Support, page 76. Table 45: Troubleshooting PWR LEDs Problem Possible cause Solution Check the power cable for damage.
  • Page 63 Opening the Web Interface., page 60. System error Open the page SYSTEM STATE. Open the page HARDWARE STATE. If a web-interface is available on the measuring system: Check the status of the measuring device. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 63 / 83 OECD_(12CH, CNO)-en-us...

  • Page 64: Troubleshooting Signal Quality

    8. Troubleshooting 8.2 Troubleshooting Signal Quality If the described options do not help to fix the problem: Contact fos4X Support. See fos4X Support, page 76. Table 46: Troubleshooting Signal Quality Signal Quality Status codes Solution Make sure to operate Temperature Low within specification.

  • Page 65: Troubleshooting Ethernet

    Turn the power supply off and Device Wait until the initialization is Initializing complete. 8.3 Troubleshooting Ethernet If the described options do not help to fix the problem: Contact fos4X Support. See fos4X Support, page 76. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 65 / 83 OECD_(12CH, CNO)-en-us...

  • Page 66: Troubleshooting Can

    Support, page 76. 8.4 Troubleshooting CAN If the described options do not help to fix the problem: Contact fos4X Support. See fos4X Support, page 76. 8.4.1 Troubleshooting CAN Connection and LEDs Table 48: Troubleshooting CAN Connection and LEDs Problem...

  • Page 67: Troubleshooting Can Object 0X2000

    See LEDs and configured correctly. on the CAN Switch on the connector flashes CAN Connector, Reboot the Blackbird OECD. Turn the continuously. page 24. power supply off and on. Make sure that the CAN Interface is configured correctly. See Commissioning the CAN Interface, page 57.
  • Page 68 8. Troubleshooting Clean the optical connectors. See Cleaning E-2000/APC Connections, page 71. Reboot the Blackbird OECD. Turn the Object 0x2000 has Other sensor error. power supply off and on. value 0x8000. Check the signal quality. See Troubleshooting Signal Quality, page 64...

  • Page 69: Troubleshooting Can Sub-Object 0X2001Sub1

    Wait until the initialization is Bit 1 of complete. 0x2001sub1 set. Initializing See 0x2001 Status, Reboot the Blackbird OECD. Turn the page 45. power supply off and on. Bit 2 of 0x2001sub1 set. Rebooting soon Wait until the reboot is complete.
  • Page 70 Solution Clean the optical connectors. See Cleaning E-2000/APC Connections, page 71. Bit 9 of 0x2001sub1 set. Reboot the Blackbird OECD. Turn the Signal Low power supply off and on. See 0x2001 Status, page 45. Check the signal quality. See Troubleshooting Signal Quality,...

  • Page 71: Maintenance

    Observe the safety instructions. See Safety, page 9. Tasks that are not described in these operating instructions may only be done by fos4X. Preventive Maintenance The product Blackbird OECD does not require preventive maintenance. 9.2 Corrective Maintenance 9.2.1 Cleaning E-2000/APC Connections Figure 34: E-2000/APC connector and socket...

  • Page 72: Replacing The Pwr Connector

    Dispose of old MC 1,5/ 2-GF-3,81 in accordance with local regulations. Attach the cable of the power supply to the MC 1,5/ 2- GF-3,81 connector. Observe the pin assignments (+) and (-) on the PWR connector. MDE1261_4-10_1.3.x_5.0_Blackbird 72 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...

  • Page 73: Replacing The Can Connector

    Connect the MC 1,5/ 3-GF-3,81 connector to the CAN connector. Switch on the power supply. 9.2.4 Firmware Update 9.2.4.1 Firmware Update via Web Interface Condition: Firmware archive for the Blackbird OECD available. MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 73 / 83 OECD_(12CH, CNO)-en-us...
  • Page 74 The firmware archive is displayed in the Firmware image: field. Click on UPLOAD FIRMWARE. The status is displayed at Status:. Wait until the firmware update is complete. Reboot the Blackbird OECD. Turn the power supply off and on. Firmware update complete. 9.2.4.2 Firmware Update via fos4X Firmware Flasher...
  • Page 75 Detected measurement devices are displayed in Available Devices. If the Blackbird OECD is not displayed: Make sure that the PC is connected to the ETH port of the Blackbird OECD. Make sure that the correct network adapter is selected. Make sure that the IPv6 protocol is enabled on the PC.

  • Page 76: Fos4X Support

    Make sure that the Blackbird OECD is not used for measurements. Make sure that a firmware archive is selected. Make sure that the firmware archive is compatible with the Blackbird OECD. 12. Start the firmware update: Click on FLASH FIRMWARE.

  • Page 77: Spare Parts And Accessories

    Power supply MC 1,5/ 2-GF-3,81 Phoenix Contact 4017918050313 connector CAN connector MC 1,5/ 3-GF-3,81 Phoenix Contact 4251140902143 Accessories Table 56: Accessories Name Type Manufacturer GTIN Optical connector OCC-A Ultra Fujikura 4251140910209 cleaner MDE1261_4-10_1.3.x_5.0_Blackbird © fos4X 2020 77 / 83 OECD_(12CH, CNO)-en-us...

  • Page 78: Taking Out Of Service And Disposal

    10.1 Taking out of Service Safety Observe the safety instructions. See Safety, page 9. Taking out of Service Taking the Blackbird OECD out of service: Switch off the power supply. Figure 38: E-2000/APC connector and socket 1 Locking mechanism 4 Socket...

  • Page 79: Disassembly

    Remove the Blackbird OECD from the control cabinet. Pack the Blackbird OECD. See Packing, page 51. 10.2 Disassembly The product may only be disassembled by fos4X or a specialized disposal company. 10.3 Disposal NOTICE Risk to the environment due to incorrect disposal of the product.

  • Page 80: List Of Figures

    Home page........................61 Fig. 34. E-2000/APC connector and socket................. 71 Fig. 35. PWR connector....................... 72 Fig. 36. CAN connector........................ 73 Fig. 37. fos4X Firmware Flasher....................75 Fig. 38. E-2000/APC connector and socket................78 MDE1261_4-10_1.3.x_5.0_Blackbird 80 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...

  • Page 81: List Of Tables

    Representation of the information in the operating instructions....7 Tab. 2. Tasks............................9 Tab. 3. Measuring Properties....................13 Tab. 4. Requirements for sensors....................13 Tab. 5. Compatible sensors from fos4X................14 Tab. 6. Ethernet-Interface......................14 Tab. 7. CAN Interface........................14 Tab. 8. Optical Data........................15 Tab. 9.
  • Page 82 Troubleshooting CAN Sub-Object 0x2001Sub1..........69 Tab. 51. Material and equipment....................55 Tab. 52. Material and equipment....................72 Tab. 53. Material and equipment....................73 Tab. 54. Material and equipment....................74 Tab. 55. Spare Parts........................77 Tab. 56. Accessories........................77 MDE1261_4-10_1.3.x_5.0_Blackbird 82 / 83 © fos4X 2020 OECD_(12CH, CNO)-en-us...

Table of Contents