Table of Contents
Advertisement
Chapter 4:
4.1 Connections overview
Connection
Power
and
1
connection
2
NMEA 2000 connection
3
To Antenna connection
Note: Despite the fact that NAVIOM AIS is equipped with moisture-proof connectors, to increase
the service life of the device, we recommend that when connecting the connectors to the device,
wear a heat-shrink tube, containing adhesive. To seal the connection, the tube must be uniformly
heated to a temperature of 130 - 160 degrees Celsius or 270 - 320 degrees Fahrenheit. Be careful
not to overheat the connector or the body of the device when heating the tube. Under the
influence of high temperature, the plastic case of the device may melt, change color, deform,
and lose tightness.
12
Connections
Connects to:
12/24 V dc power supply
data
NMEA 0183 devices
NMEA 2000 backbone
12 V dc power supply
NMEA 2000 backbone
VHF antenna
Suitable connector:
Universal M12 8-pin
connector (supplied)
NMEA2000 Micro-C M12
5-pin connector
PL-259 connector
Advertisement
Table of Contents
