Table of Contents
Advertisement
KeyCard theft protection system
Make sure that the unit is switched off; the
operating panel is unlocked; the KeyCard
has been removed; "LED ON" has been se-
lected in the DSC mode (default setting).
If necessary, please refer to the section on
"DSC programming - KC (KeyCard) LED".
Switching off the flashing light
The flashing light can be switched off by
selecting "LED OFF" in the DSC menu.
Care of your KeyCard
To ensure that the KeyCard will function
properly it is important that the contacts are
free from any foreign particles. Avoid direct
skin contact.
If necessary, clean the KeyCard contacts
using a cotton swab dipped in rubbing alco-
hol.
68
Lost or damaged KeyCard
If the KeyCard for your unit is lost or dam-
aged you can train a new KeyCard.
You can purchase the new KeyCard from
any authorised dealer. You will also require
the master code for the unit, which you will
find in the radio pass.
Always keep the radio pass in a safe
place. Do not leave it in your vehicle.
Training the new KeyCard
•
Insert the new KeyCard into the unit
and lock the operating panel into posi-
tion.
•
Switch the unit off.
•
Press TU and Key1 at the same time
and switch the unit on. "0000" will ap-
pear in the display.
•
Now use the rocker switch to enter the
four-digit master code from the radio
pass:
/
- Enter digits
(press as often as required)
<< >> - Select the entry position.
•
Press ENT after you have entered the
correct master code.
The new KeyCard has been accepted when
the unit begins to play.
Advertisement
Table of Contents
