Table of Contents
Advertisement
Remote Power Supply Rack Shelf safety warnings
To prevent personal injury and to protect the device from damage, read and follow these safety
precautions.
Warning! If not avoided, the following could result in death or serious injury.
•
This product must be installed within a restricted access location not accessible by the general
public.
•
SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
•
A minimum of two people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
•
A certified electrician must be present during installation to ensure the installation meets the
local electrical code.
•
Install the product near an easily accessible AC receptacle.
•
Hazardous voltages are present at power system inputs. The DC output, though not dangerous
in voltage, has a high short-circuit current capacity that may cause severe burns and electrical
arcing.
•
SHOCK HAZARD! Power supply uses double pole/neutral fusing. Disconnect all power sources
before opening the product.
•
Fuses are present in active and neutral lines of the Remote Power Supply Rack Shelf.
F1—Rated 15 A, 250 VAC
F2—Rated 15 A, 250 VAC
•
Before working with live power systems, remove all metallic jewelry (such as watches, rings,
metal rimmed glasses, or necklaces) and wear safety glasses with side shields at all times during
the installation.
•
Motors and fans may start without warning.
•
Use insulated hand tools while working on live power systems.
Required tools
Make sure the following tools are available during servicing.
Tile installation tools and hardware
•
Torque driver
•
M6 screwdriver
•
8 mm wrench
•
Magnetic LED module removal tool (P/N: 003-005735-xx)
•
Screws appropriate for the mounting surface. These screws are not provided by Christie.
Velvet LED Display Panels Service Guide–Apex Series
020-102617-01 Rev. 1 (01-2018)
Copyright
2018 Christie Digital Systems USA Inc. All rights reserved.
©
Replacement parts
6
Advertisement
Table of Contents
