Page 1
S erv ic e Gu id e 020-102617-01 Velvet LED Display Panels Apex Series...
Page 2
The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Warning! If not avoided, the following could result in death or serious injury. • After the replacement of the power supply, hi-pot and ground/earth bond tests must be performed. Only Christie qualified technicians who are familiar with the necessary precautions can perform these tests. •...
8 mm wrench • Magnetic LED module removal tool (P/N: 003-005735-xx) • Screws appropriate for the mounting surface. These screws are not provided by Christie. Velvet LED Display Panels Service Guide–Apex Series 020-102617-01 Rev. 1 (01-2018) Copyright 2018 Christie Digital Systems USA Inc. All rights reserved.
After the files have finished loading, click Save calibration coefficients on receiving cards. d) Adjust any light or dark lines between tiles. For additional information, see Christie E500 LED Display Control System Software User Manual (P/N: 020-102222-xx). Removing the carrier assembly To access the interior of the cabinet, remove the carrier assembly.
Maintaining the LED panels Learn the information and procedures for performing maintenance on the Christie Velvet LED Display System. Cleaning the LED panels Learn how to clean the Christie Velvet LED Display System panel. Notice. If not avoided, the following could result in property damage.
Page 15
Corporate offi ces Worldwide offi ces USA – Cypress Australia Eastern Europe and India Singapore ph: 714-236-8610 ph: +61 (0) 7 3624 4888 Russian Federation ph: +91 (080) 6708 9999 ph: +65 6877-8737 ph: +36 (0) 1 47 48 100 Canada –...