32
Setting up your computer and getting started
The computer has two memory module slots — Slot A and
Slot B. You can install one or two memory modules.
If the computer is on, begin at step 1; otherwise, skip to step 3.
1
Click Start, then Turn off computer or Shut Down
(depending on the system).
The Turn off computer or Shut Down window appears.
2
Click Turn Off or Shut Down.
The operating system turns off the computer.
3
Unplug and remove any cables connected to the
computer, including the AC adapter.
4
Remove the main battery. For information on removing
the main battery, see "Removing the battery from the
computer" on page 46.
5
Close the display panel and turn the computer upside
down to locate the memory module slot cover.
Sample locating the memory module slot cover
Before you install or remove a memory module, turn off the computer
using the Start menu. If you install or remove a memory module while
the computer is in Standby or Hibernation mode, data will be lost.
Memory module
slot cover
Front of computer