Table of Contents
Advertisement
30
Setting up your computer and getting started
The AC power and battery lights on the indicator panel
glow blue.
Connecting a printer
You can connect a USB-compatible printer to your computer
through one of the USB ports. To determine if the printer is
USB-compatible, check its documentation.
To make the connection, you need a suitable USB cable,
which may come with your printer. If a USB cable was not
included with your printer, you can purchase one from a
computer or electronics store.
If your printer supports Plug and Play, your computer will
automatically recognize the printer; the printer is then ready
for use. Refer to your printer documentation for further
instructions.
Never tamper with the cord/cable or plug; never splice or alter a cord/
cable; never bend or twist a cord/cable; never place heavy objects on a
cord/cable; never place a cord/cable near a heat source; never run a
cord/cable through a pinch point such as a door or window; never use
nails, staples or similar objects to fasten or attach cord in place; never
attempt to disassemble or repair an AC adapter or a Battery Charger.
Doing any of the above may damage the cables, and/or result in a fire
or electric shock, possibly resulting in serious injury.
Never attempt to connect or disconnect a power plug with wet hands.
Failure to follow this instruction could result in an electric shock,
possibly resulting in serious injury.
Your printer documentation may require you to install the printer
software before physically connecting the printer to your computer. If
you do not install the software as instructed by the printer
manufacturer, the printer may not function correctly.
Read the documentation that came with your printer. Follow the
manufacturer's instructions when connecting a local printer.
TECHNICAL NOTE: To determine if your printer supports Plug and
Play, check its documentation.
Advertisement
Table of Contents
