Table of Contents
Advertisement
Installation and connection
en
Take the power cord out of the
3.
holders. Remove sleeves.
Insert covers. Lock firmly by
4.
pressing on the locking hook.
Connecting the water
:
Warning
Danger of death from electric shock!
Danger of death if live parts are
touched.
Notes
To prevent leakage or water
■
damage, follow the instructions in
this chapter!
Operate the washing machine with
■
cold drinking water only. Do not
connect to the mixer tap of an
unpressurised hot-water apparatus.
Use only the supplied inlet hose or
■
one purchased from an authorised
specialist outlet, not a used one!
If in doubt, have the appliance
■
connected by a technician.
30
Water supply
Water inlet hose: do not kink,
Note:
crush, modify or sever (strength is no
longer guaranteed).
Optimum water pressure in the mains:
100–1000 kPa (1–10 bar)
When the tap is turned on, the water
■
flow is at least 8 l/min.
If the water pressure is higher, install
■
a pressure reducing valve.
Connect the water supply hose
1.
(¾" = 26.4 mm).
:
Warning
Threads for screw connections
may be damaged!
If the screw connections are
tightened too tightly using a tool
(pliers), the threads may be
damaged.
Tighten plastic screw-fittings by hand
only.
Carefully turn on the tap and check
2.
that the connection points are not
leaking.
Advertisement
Table of Contents
