Table of Contents
Advertisement
Connecting the water
ã
Warning!
Danger of death from electric shock!
Danger of death if live parts are touched.
Do not immerse Aqua-Stop safety device in water
(contains an electric valve).
²
– To prevent leakage or water damage, follow the instructions
– Operate the washing machine with cold drinking water only.
– Do not connect to the mixer tap of an unpressurised hot-
– Use only the supplied inlet hose or one purchased from an
– If in doubt, have the appliance connected by a technician.
Water inlet hose
²
Water inlet hose: do not kink, crush, modify or sever (strength is
no longer guaranteed).
Optimum water pressure in the mains: 100–1000 kPa (1–
10 bar)
Ø
Ø
1.
ã
Warning!
Threads for screw connections may be damaged!
If the screw connections are tightened too tightly using
a tool (pliers), the threads may be damaged.
Tighten plastic screw-fittings by hand only.
PD[
ƒ
PLQ PP
Aqua-Stop and Aqua-Secure Standard
58
in this chapter!
water apparatus.
authorised specialist outlet, not a used one!
When the tap is turned on, the water flow is at least 8 l/min.
If the water pressure is higher, install a pressure reducing
valve.
Connect the water supply hose.
to the tap (¾" = 26.4 mm):
PD[
ƒ
Advertisement
Table of Contents
