Troubleshooting - Salora 60BFH3800 Manual

Troubleshooting

Problem
1. indicator light
doesn´t work
when the power is
on
2. The projector
doesn´t work
when using the
remote control
3. No image
4. The projector
turns of
automatically
 Power cable is not connected correctly.
 The power switch is faulty.
 The power switch is turned off.
 The remote control has no batteries or the batteries are low.
 The remote control is not directed at the IR receiver.
 A bright light is shining on the IR receiver.
 The input source may not be correct.
 No input signal.
 The input cable is not connected.
 If under PC mode, the output frequency is not 50-60Hz.
Make sure the PC output is connected with the projector.
 When you are using a laptop, make sure the output signal is
VGA.
 The projector ventilation is blocked.
 The voltage is not stable.
 The projector has overheated, check if the fan is not broken.
Possible Causes