Albrecht DR 490 Manual page 42

Select your required AP.
Enter WEP or WPA code to connect the WiFi.
If you would like to change/correct an entry , press ◄ to correct.
12.3.2. Wireless Network (WPS)
If you are using a router with WPS/QSS button, you may set up the network connection simple via
WPS function. Enter it and go to press the WPS/QSS button on your router within 120 seconds. The
connection between the router and the DR 490 will then be confi gured automatically.
12.3.3. Manual Confi guration
You can choose DHPC (which IP assigned automatically) or manually input IP address for wireless
42 English