Table of Contents
Advertisement
12. Grease the seatclamp screw re-install it.
Tighten it to 4 Nm once the correct
saddle height has been set using a
torque wrench.
13. Install the lever on the handlebar and
tighten according to the torque settings.
14. Re-install the cover and the shock,
respect the torque settings indicated on
the bolts.
Contact Information
Please contact us if you need further assistance with your RAD seatpost:
BMC Customers:
https://www.bmc-switzerland.com/int-en/support/contact/contact/
BMC Retailers:
https://b2b.bmc-switzerland.com/de-de/contact-us
19
7
Advertisement
Table of Contents
