Power Supply - Pentair Schroff 24579-604 User Manual

CPCI Case System 3/4 U
24579-604

2.6 Power Supply

Hazardous voltage!
Parts of the power supply may be exposed with hazardous voltage. Always
remove mains/line connector before carry out any assembly work.
Caution!
Your system has not been provided with a AC power cable. Purchase a
AC power cable that is approved for use in your country. The AC power cable
must be rated for the product and for the voltage and current marked on the
product's electrical ratings label. The voltage and current rating of the cable
should be greater than the ratings marked on the product.
The CPCI system is powered by a CPCI plug-in power supply with wide range
input (100 - 240 VAC).
The power supply is plugged-in in a dedicated slot at the left front side. The
power supply contact via a 47-position connector to a Power backplane.
The power input is provided by an AC mains/line module with IEC 320-C14
connector, integrated mains/line fuses and line filter.
The fuse rating is 4 A slow blow.
Figure 2: AC mains/line module
1 Fuse holder
2 Mains/line switch
www.schroff.biz
3 AC Connector (IEC320-C14)
5
Product Definition
12309010
R1.0, August 03, 2011