Table of Contents
Advertisement
CPCI Case System 3/4 U
24579-604
2.3 Case
The 4 U case is based on the Schroff ratiopacPRO-air system with EMC
shielding. The card cage enables the assembly of 8 CPCI front boards
(3 U, 4 HP, 160 mm deep) and 8 Rear I/O Boards (3 U, 4 HP, 80 mm deep).
The lower guide rails of the card cage are equipped with ESD clips.
Variations
The Schroff assembly service can customize your system with:
• Different Backplane configurations
• Special power supplies
More information in the catalogue or at www.schroff.biz
2.4 CPCI Backplane
The 3 U/ 8 slot Backplane provides:
• CompactPCI bus 32 bit (PICMG2.0 R.3.0) with System Slot right
• System slot expandable from 4 HP to 8 HP
• Rear I/O on P2
• V(I/O) 5 V (adjustable to 3.3 V)
Applicable Specifications:
PICMG 2.0 R3.0 CPCI Core Specification
PICMG 2.01 R2.0 Hot Swap
PICMG 2.09 R1.0 System Management Bus
PICMG 2.10 R1.0 Keying
More information in the manual for the backplane order no.: 73972-075
2.5 Power Backplane
The 3 U / 8 HP Power Backplane supports pluggable CPCI PSUs with P47
connector. The Power Backplane provides 2 disk drive power connectors.
More information in the backplane's user manuals order no.: 73972-072 and
73972-101
www.schroff.biz
4
Product Definition
R1.0, August 03, 2011
Advertisement
Table of Contents
