Komatsu PC88MR-10 Operation & Maintenance Manual page 231

Hydraulic excavator, serial numbers f10236 and up/7001 and up
Hide thumbs Also See for PC88MR-10:
Table of Contents

Advertisement

OPERATION
PROHIBITION OF SWINGING OR TRAVELING WHEN ROCK IS ON TOP OF
TRACK ASSEMBLY
If the machine travels or swings with crushed stones, soil, or
sand on the track, they hit and damage the undercover and
frame. In the worst case, the hydraulic components are dam-
aged and a serious accident can result.
During operation, keep checking the track top for crushed
stones, soil, and sand.
DO NOT PERFORM LIFTING OPERATIONS
Although lifting operation with this machine is prohibited, it is
permitted only when the special lifting hook is installed.
PROHIBITION OF SUDDEN LEVER OR PEDAL SHIFT DURING HIGH SPEED
TRAVEL
(1) Do not operate the levers and pedals suddenly nor take any
other action to move the machine quickly.
(2) Do not operate the levers or pedals suddenly from FOR-
WARD (A) to REVERSE (B) (or from REVERSE (B) to FOR-
WARD (A)).
(3) Do not operate the levers or pedals suddenly (do not re-
lease them suddenly) to stop the machine when driving it at
high speed.
PROHIBITION OF HIGH-SPEED TRAVEL OPERATIONS ON ROUGH GROUND
If the machine travels on rough ground (rock-bed, etc.) at high
speed, large push-up loads are applied to the chassis, thus the
service life of the chassis is shortened.
MACHINE OPERATIONS AND CONTROLS
WENAM00042
3-159

Advertisement

Table of Contents
loading

Table of Contents