Cassette Tape Player Operation - Blaupunkt Washington CM147 Owner's Manual

Cassette Tape Player Operation

Once playback location change is complete, tape display sequence follows.
Cassette Insertion & Eject
"LOADING" appears upon insert and cassette play follows. Press Eject for a motorized eject.
"EJECT" appears and radio plays. The following indicates what happens with insert and eject under
various conditions:
Activity Ignition off
Insert No Reaction
Eject OK
Cassette Direction/Program Selection
"TAPE 1" indicates top side of tape is in play; "TAPE 2", bottom side. Press
direction during playback. Tape automatically changes direction at end of tape.
Cassette Fast Wind
Press << to activate fast rewind ("FAST REW") or >> to activate fast forward, ("FAST FWD").
To stop FF, press /\, V, << or >> buttons. To stop FR, press /\, V, << or >>.
Super-Cassette Program Search
Press /\ or V once for each track you wish to advance or go back. Display will blink SEARCH plus
the number of tracks, e.g. "SEARCH 4" or "SEARCH-4". If V is pressed more times than current
track value, tape will fast-rewind and begin play at first track. If /\ is pressed more times than there
are tracks, tape will advance to end of tape, autoreverse and begin play. To stop CPS up function,
press << or >> or V. To stop CPS down, press << or >> or /\.
Radio Monitor
Radio can be heard during tape winding modes (FF, FR, Tape Scan, Track Repeat, Cassette
Program Search and Blank Skip). When activated (through Menu), RM icon appears during
cassette play. Preset stations on last-heard band available during tape winding.
Ignition On/ Ignition On/
Unit Off Power On/
Non-Tape Source
Turns Unit On Tape becomes active source
OK OK
to reverse tape
17