Philips CD3652S/90 Quick Start Manual page 2

What's in the box
Base station with
bracket for CD360
OR
R
Handset CD365
User manual Guarantee
Note
•
In some countries, you have to connect the line adaptor to the line cord, then
plug the line cord to the line socket.
•
In multi-handset packs, there are additional handsets and chargers with power
supply units.
Caution
•
Use only the supplied batteries and adaptor
1 Connect
Line cord*
1 Connect the output plug of the power socket to the bottom of the base station.
Power supply
2 Connect the power socket to a standard wall outlet.
3 Connect the telephone line cord to the phone socket at the bottom of the base
station and the wall phone socket.
Install
2
Quick Start Guide
1 The batteries are pre-installed in the handset. Pull the battery tape off from
the battery door before charging.
2 Place the handset on the base station to power up.
Note:
Charge the batteries for 24 hours before first use.
For more information on the battery icon status, see the User Manual.
Connect the base station
Install the handset
CD365
R
Configure your phone (if necessary)
When you see the welcome message, press [OK], select
1
your country, press [OK] to confirm.
»
The country setting is saved.
2 Set the date and time.
»
The phone is now ready to use.
3
CD365
Enjoy
Make a call
1 Press and dial the phone number; or
2 Dial the phone number and Press
Answer a call
When the phone rings. Press
End a call
Press .
Adjust the earpiece volume
Press or to adjust the volume during a call.
Set the handset's ringtone
Press menu.
1
Select [PERSONAL SET] > [HANDSET TONES] >
2
[RING TONES], then press [OK] to confirm.
Select a ringtone, then press [OK] to confirm.
3
»
The setting is saved.
Add a record
Press menu.
1
Select [PHONEBOOK] > [NEW ENTRY], then press [OK] to confirm.
2
Enter the name then press [OK] to confirm.
3
Enter the number, then press [OK] to confirm.
4
to dial out the call.
or to answer the call.