1.0
PowerMaxx2 overview
The PowerMaxx2 is designed to provide battery backup to pump stations in the event of a mains failure.
They have been specifically designed to meet the requirements of the pump industry. The PowerMaxx2 has the
ability to connect to the AlertMaxx2 high level alarm and Rego1 control panel.
2.0
Box contents
PowerMaxx2 (DMS-280-1) contents
•
1 x PowerMaxx2 Unit - Battery supplied internally, but disconnected on delivery
•
Gland Pack (4 x Large Cable Glands, 2 x Large Blanking Plugs, 1 x Small Cable Gland, 1 x Small Blanking
Plug, 4 x Large Nuts & 1 x Small Nut)
•
1 x 3m length of MaxxConnect family cable
•
1 x Installation & Operating Instructions (this document)
•
1 x Chamber Location Sticker Sheet (for Spurs)
3.0
Technical information
Size
Weight inc. battery
Mains supply
Internal battery
Power - charging
Power - idle
Visual display
Operating temperature
Ideal operating temperature
Humidity range
Approximate Installation time
Feeds
Devices (pump/s)
IP Rating
4
Specification
W: 155mm x D: 425mm x H: 300mm
19kg
200-250V AC (50Hz)
24V - 1x22Ah VRLA
75W
<3W
2 x seven segment
5-35°C
20-25°C
<80% RH
60 minutes
1 or 2 (13A non-switched)
1 or 2 (cannot provide together)
IP2X