Section 8: Troubleshooting - Fireco Dorgard Pro Handbook

Failing to
to bind
Dorgard Pro
State
Dorgard Pro will show you it has unsuccessfully bound
by showing you the radio LED as red for 4 seconds.
It will then take itself out of binding mode and remain
in acoustic mode.
4
If Dorgard Pro again lights its radio LED red (4s) it has unsuccessfully bound to the Transmitter or
Repeater.
You will need to re-site the Transmitter or Repeater closer to the Dorgard Pro
OR
bind the Dorgard Pro to a different Repeater
OR
add another Repeater to your system to increase the coverage.
Check
Check that the Transmitter or Repeater to which you
want the Dorgard Pro to bind is in binding mode.
The Transmitter or Repeater will be flashing its top
radio LED green.
Fix
While the Transmitter or Repeater is in binding mode,
try pushing the bind button on the Dorgard Pro again.
The Dorgard Pro will flash its top radio LED green and
retry binding to the Transmitter or Repeater.
Troubleshooting
Dorgard Pro
!
Dorgard Pro
!
Page 11