Rear Panel; Operation Guidance - Qanon D Series User Manual

7, LCD
Show all the related operation parameter and status of current operation.
8, Parameter Edit Knob
Edit the whole menu and parameter setting confirm by press.
9, Parameter edit keys
Choose all the system menu/input parameter/output parameter, exit by pressing "exit" key.
10, USB
Used to connect with PC and center-control equipment, remote control.

REAR PANEL

1 2
1, Power Socket
The voltage is 95V-250V.
2, Power on/off Switch 3,
RS232/485 interface
Center-control by RS232, cascade control by RS485.
4, Ethernet control interface, achieve long-distance control by wire or WIFI 5,
Output interface
Male XLR balanced output 1-8.
6, Signal input interface
Female XLR balanced input A-D.

OPERATION GUIDANCE

4*8II DSP Processor
Version 1.0
DSP Processor
00
F Default Preset
ID Number Select ID:
1
4
3
Below status after power on:
Power on, show brand, model and version.
After self-check, show brand, model and current user preset.
Press UTIL key, enter below setting status
Press the first time, enter ID number setting: the ID number of the units,
should be different when cas cade connection, the setting scale is1-254. (If cas
cade connection units are over 16 or long distance, a loaded 120 ohms
resistance should be parallel connected by RS 485.
5
Digital Matrix Processor
6
2