Feeding Strap - Eagle 800 Operation Manual

3. Machine Operation

3.2 Feeding Strap

1. Load the spool of strapping material onto the strap stool. The strap should feed from the
bottom-rear of the spool as viewed from the front of the machine. Using Figure 3-1 as a
reference, feed the strap through the guide, roller and pre-strap feeding roller.
2. Use the lever (Fig. 3-2) to release tension on the strap feeding mechanism so that strap can be
fed through the rollers and into the machine.
3. Open the cover to the collection chamber (Fig. 3-3) to feed strap into the strain swing rocker
(Fig. 3-4). Feed strap into the strain swing rocker by rotating the wheel while feeding the strap.
4. Once strap is loaded into the strain swing rocker, turn the strap direction knob to "Send" to
complete strap feeding.
Fig. 3-1
Fig. 3-3
- 6 -
Fig. 3-2
Fig. 3-4