Eldat APF01 Manual page 2

3 BASIC SETTINGS
Menu structure/display
Display
 or 
Selection with the key
TIME/DATE
PAUSE
DIALCODE
MFS/PD MFS
PD
CALL LED ON
OFF
FLASH TIME
KEY TONES OFF
ON
CONTRAST
CALL FLASH
ON
OFF
EMERGENCY
MESSAGE
SIL. DIST. OFF
ON
EMERG. FUNCT.
ON
OFF
CONTINUOUS BOOST OFF
ON
RINGER VOL.
RINGER MELODY
VOICE ANN.
ON
OFF
EMERGENCY REGISTR.
TRANSMITTER
DELETE?
REC. NAME
SAVE NO.
LANGUAGE/SPRACHE DEUTSCH
ENGLISH
ESPANOL
NEDERLANDS
FRANCAIS
ITALIANO
M1 Setting the time and date
1. Press the key, then the / keys until the
TIME/DATE screen appears, press OK to
confirm.
2. Set the hour (00–23) using the / keys,
press OK to confirm; the cursor will then move
to the minute.
3. Set the minute using the / keys, press OK
to confirm; the cursor will then move to the
day.
4. Set the date using the / keys, press OK
to confirm; the cursor will then move to the
month.
5. Set the month using the / keys, press OK
to confirm. Press OK to confirm
M2 Pause
key, use the / key to select the PAUSE
time (1–9 seconds) (the default setting is 3).
Press OK to confirm.
M3 Dialling code
key, select DIALCODE, press OK to confirm.
Enter the number using the keys and press OK
to confirm.
M4 Signalling process setup
Press the key, then / keys until MFS/PD
appears on the screen. Press OK to confirm, se-
lect MFS (multi-frequency signalling)/ PD (pulse
dialling) using the / keys, press OK to confirm.
M5 Call LED setup
key, then / buttons until Call
Press the
LED appears on the screen. Press OK to con-
firm, select ON/OFF using the / keys, press
OK to confirm.
M6 Flash time setup
Press the key, then the / keys until FLASH
TIME appears on the screen. Press OK to con-
2
firm, select the flash time (100/300/600 ms) using
the / keys, press OK to confirm. The default
see point
setting for most countries is 100, and 300 for
France/Portugal.
M1
M7 Key tones setup
M2
M3 key, then the / keys until KEY
Press the
M4 TONES appears on the screen. Press OK to con-
firm, select ON/OFF using the / keys, press
M5 OK to confirm.
M8 LCD contrast setup
M6
M7
Press the key, then the / keys until CON-
TRAST appears on the screen. Press OK to con-
M8
firm. Use the / keys to select the preferred
M9
setting, press OK to confirm.
M9 Visual call signal setup
M10
A flashing light signal can be activated to accom-
M11
pany the ringtone for alerting you of an incoming
CALL FLASH)
call (
M12
Press the key, then the / keys until CALL
FLASH appears on the screen, press OK to con-
M13
firm. Select ON/OFF and press OK to confirm.
M10 Recording an emergency message
M14
M15
1. Press the key, then the / keys until
M16
EMERGENCY MESSAGE appears on the
screen.
M17
2. Press the OK key to play back the recording.
3. Press and hold the OK key to record a new
M18
message (max. 30 seconds).
M19
Recording begins after the beep; let go of the
M20
OK key to stop recording. The recording will
then be played back automatically.
M11 Silent distress call
When the Silent distress call function is active,
neither a message nor a ringtone is audible (see
"help message").
Press the key, then the / keys until SIL.
DIST. appears on the screen. Press OK to con-
firm, select ON/OFF using the / keys, press
OK to confirm.
M12 Activating the distress call function
When the distress call function is activated, a
stored telephone number is called and a record-
ed message requesting help will be played back
when you press one of the direct dial keys or the
key on the call transmitter.
Press the key, then the / keys until EMERG.
FUNCT. appears on the screen. Press OK to con-
firm, select ON/OFF using the / keys, press
OK to confirm.
M13 Booster function setup
key, then the / keys until CON-
Press the
TINUOUS BOOST appears on the screen, press
OK to confirm. Select ON/OFF using the /
keys. The default setting is off (OFF).
M14 Adjusting the ringer volume
Press the key, then the / keys until RING-
ER VOL. appears on the screen. Press OK to
confirm. Adjust the volume using the / keys
(5 settings), press OK to confirm.
The volume for the speakerphone function
(speaker) can be adjusted by using the /
keys during a call.
M15 Adjusting the ringtone volume
Press the key, then the / keys until RING-
ER MELODY appears on the screen. Press OK
to confirm. The phone has three melodies to
choose from. Use the /, keys to select your
preferred melody, press OK to confirm.
The melodies are played back during selection;
Melody 2 is the default setting.
.
M16 Voice announcer setup
key, then the /keys until VOICE
Press the
ANN. appears on the screen. Press OK to con-
firm. Select ON/OFF using the / keys, press
OK to confirm. If you select ON, number keys
and help messages will be announced when you
press them.
M17 Teaching in/deleting call transmitter
The phone is supplied with an RT26 wristband
transmitter as a call transmitter. This is already
taught in to the phone. Additional wristband trans-
mitters or other Easywave call transmitters (e.g.
RT27 necklace transmitter) must be additionally
taught into the phone.
Teaching in a call transmitter
1. Press the key, then the / keys until
EMERGENCY TRANSMITTER appears on
the screen.
2. Press OK to confirm.
3. Select REGISTR. using the / keys, press
OK to confirm.
The word REGISTR... will appear on the screen
for 3 seconds. Now, press and hold the call trans-
mitter key for 1 second until OK appears on the
screen. You can use this process to teach in up to
5 call transmitters. If the connection has not been
established, the word ERROR will appear on the
screen and you will need to repeat the process.
Deleting a call transmitter
If you select DELETE?, all taught in call transmit-
ters will be deleted.
1. Press the key, then the / keys until
EMERGENCY TRANSMITTER appears on
the screen.
2. Press OK to confirm.
3. Select DELETE using the / keys, press
OK to confirm.
Press and hold the key to exit this
 
M18 Recording, changing or deleting
a name announcement
If caller information is active, the phone will dis-
play and announce the caller's number when
you receive a call. If this number is stored in your
contacts list, the name will also be displayed. If a
name announcement has also been recorded for
the number, the name will be announced rather
than the number.
1. Press the key, then the / keys until
REC. NAME appears on the screen.
2. Press OK to confirm.
3. Use the / keys to select the number for
which you would like to record a name.
4. Press and hold the OK key. After the beep, say
the text or name loudly and clearly into the mi-
crophone. Then release the OK key. Record-
ing will stop automatically after 4 seconds and
the new recording will be played back,
5. To create additional recordings. repeat steps 3
+ 4 or press the keys to exit recording mode.
 
M19 Storing a number
See also Section 7.1 "Storing a number in the
contacts list", page 3.
M20 Selecting the language
Press the key, then the / keys until LAN-
GUAGE/ SPRACHE appears on the screen.
Press OK to confirm, then use the / keys
to select your preferred language, press OK to
confirm.
menu.